Before removing the tire and installing the tire, the grease must be evenl applied on the tire mouth, otherwise it will easily hurt the tire mouth. Before tying the tire, use a shovel to shovel the tire mouth, and squeeze the tire rod as flat as possible, so that the shovel head and the steel ring have a gap of 0.5 cm. Damage the device. The machine should not be exposed to rain to avoid damage. The air compressor should be drained regularly to prevent a large amount of water from flowing into the motor and causing damage to the machine.
After using it a few times, be sure to check the tightening of each fixing screw. Each screw must be re-tightened. Regular inspections are required in the future to prevent the screws from loosening and damaging the device. The tire picking device and tire mounting device should be cleaned regularly to prevent rust. Regularly fill with wind gun oil. Maintenance of the machine head: after removing the inner connecting shaft, add grease into it and turn the machine to lubricate the gears.
