Your cart is empty.
Your cart is empty.Tanner Mattern
2025-08-28 12:55:34
After scrapping with unmarked 5/16" Ts from the hardware store on two separate occasions, I finally found this clearly marked 1/4". Fit great and installed in minutes. Does seem a tad more rigid than the wrong sized ones i bought, but I think that helped the install go more smoothly due to less flex in the channel. Was about 4" longer than my 16' door so perfect on that front as well.
Mommo Bear
2025-08-19 15:11:00
My garage door seal had rotted. We tried another brand, it did not work. THIS ONE DID!!! IT'S AMAZING!!! Slide right into place, now my garage is literally as warm as my house!
jason marrs
2025-08-08 15:22:18
This seal is great. Seems pretty durable. After trying two other seals, this one fit. Not super easy to install, but with a second person, a bottle of soap, and a spray bottle I was able to install this seal and it stayed in the retainer. I bought the longer length and glad I did. Trim to fit. The extra length helped with the stretch pull back that kept happening while installing. Door seals great.
Fuzz
2025-07-29 18:08:50
My garage door bottom has 1/4" wide slots and it is very difficult to find a seal that has this size, this one fit the bill. The quality of the rubber is very good and fit the door perfectly. I would recommend buying to a friend.
kt_jeepgirl
2025-07-03 19:27:01
I read tons of reviews and was very worried about this fitting. My old weather stripping was 24 years old and 6 inches on one side was missing letting in bugs, dirt, wind, and rain. This took me maybe 10 minutes to install with no types of silicone or soapy water. It just slid right onto the track. The biggest issue was having to adjust the travel on the garage door but that wasn’t the fault of the weather stripping. Took me an hour to figure out the travel. All good now! Would definitely buy again if I needed it.
lynn
2025-06-29 15:30:44
Fairly stiff/not as pliable as it needs to be. T is 1/16" less than old one, apparently makes a big difference as it would not stay in the track, even without door movement. This time found a better product at the hardware store at half the price.
CW99
2025-06-04 10:24:14
The door seal I purchased had a 1/4 inch tee on each side. There are others that are 5/16 inch. Know what size your door track is. Needs to match. I purchased a door seal at Lowes. No size listed on packaging. Yes it was 5/16 inch tee. Tried for a bit and gave up . Looked at the old seal I removed and yes it was 1/4 inch. So happy I found this one. Installed in less than 15 minutes. I used about 6 inches extra on each end and folded it back inside the openings, it locks it in place. If you have a helper it is good to have one feed it in and the other to pull it across the door. Works perfectly.
Jamie
2025-05-20 17:24:46
Installed seal on a 16 ft wide, 2" deep garage door. The 1/4" wide T was the correct size for my application. The couple that I purchased at the big box stores had a 5/16" wide T. I cleaned the track out and spread dishwashing liquid along the track. Once the seal was started, I pulled it across the track and my wife helped guide it. It could be a one person job, but two made it easier. Quality is good, but material is more medium to light duty.
Sylvia
2025-04-29 14:19:57
Seals well.
Nigel R.
2025-03-31 14:05:40
This is exactly what I needed. The size and fit were good. The only drawback is that the plastic is very flimsy. Not like the original.
Duane Dion
2025-03-09 17:31:12
It seems ok rubber could be softer
Don Zunti
2025-02-19 10:09:37
Ordered a 20ft to do 2 10ft doors. Roll was about 4" less than 20ft, so have a 1" gap at each end of each door.
Recommended Products