ICUIXIAN Video Wall Controller 2x2 4K@60Hz HDMI2.0(HDCP2.2/1.4)

ICUIXIAN Video Wall Controller/Video Wall Processor 2x2

4 Channel Video Wall Controllers Multiple Splicing Modes

• Simple Operation, Plug And Play, Multiple Splicing Modes

Video Wall Controller 4K Supports 1HDMI 2.0(HDCP 2.2)+1DP Input And 4 HDMI Output Signals, Supports 4 LCD TVs Splicing. Supports Multiple Placement And Splicing Modes To Meet Your Different Needs. For Example, The 6-Screen Splicer Can Be Set To 2x2, 1x4, 4x1, 1x2, 2x1, 1x3，3x1 And So On, And There Are More Than Ten Splicing Modes For You To Choose.

• Product Functionality Features

1. HDMI Input Signal Resolution Up To 4096x2160@60Hz, And Backward Compatible

2. 4HDMI Output Resolution Support 3840x2160@60Hz, 3840x2160@30Hz, 1920x1080P@60Hz And Other Ultra-High-Definition Resolution

3. 180-Degree Inversion Of Any Output Image, Support For Display Reversal

4. 4-Channel Video Wall Controller Supports The Client To Change The Connection Mode, Such As 4-Screen Splicer Can Be Set To 2x2, 1x4, 4x1, 1x2, 2x1, 1x3，3x1 And Other Connection Modes

5. Boundary Masking Technology: Adjust The Masking Width In The Image Splicing Seam Area To Offset The Image Disconnection Caused By The Mechanical Frame Of The Lcd Screen To Ensure That The Displayed Image After Splicing Is Not Affected By The Whole.

• Operating Instructions

1. Turn on the Power about 9 Seconds later, The Display will First Display the output Port Number of the Splicer, Which Can be Based on the Display of the Specific Port Number and the order of the Splicing Screen Arrangement introduced above to Determine Whether the Output of the Splicer and Splicing Screen Connection Between the two is correct, The two Must Correspond to each other.

2. The output Port Number Will Automatically Disappear After a few Seconds, And only then Display the Spliced image, The Default HDMI input, If the Front-end has no input signal, The Screen will Display a Black Background "no signal" dialog box.

3. If Needed, You can Correct the Picture Disconnect Phenomenon Caused by the Physical Border of the Splicing Screen and Splicing gaps. It is best to fix the Signal Source in an image Such as a human face or a large circle, Use the Remote Control to Adjust the Screen so that the image in the adjacent Splice can be a Smooth transition without distortion

• Cautions

1. The input Signal Source of the Terminal Display (usually a TV or splicing screen) Must be Switched to HDMI input, And if the Display has Multiple HDMI inputs, Be Sure to Select the Correct HDMI Port number.

2. Terminal Display if the Splicing Screen, Must be Adjusted to a Single Screen Independent Display Mode, Can not be set to Splicing Mode, Because the Splicing Function is Completed by the Splicing Processor. If double Splicing, Then the Screen image will be abnormally enlarged.

Meet a Variety of Commercial Display needs

The use Scenarios are not limited to this.

Supermarkets, Shopping Malls, Conference rooms, Classrooms, Hotels restaurants, Game venues, Bars, and home use of large-screen movies - the Demand for Video Wall controllers for these occasions is growing.

Video Wall with Matrix Switchers, Better Results with more uses, Such as Radio and Television Projects, Nightclubs, Sports clubs, Gymnastics clubs, Multimedia Conference halls, Large screen display projects, Television teaching, Command, and Control Centers, and other places.