Your cart is empty.
Your cart is empty.Product Description
2PCS High Precision AS5600 Magnetic Encoder Magnetic Induction Angle Measurement Sensor Module 12bit
Specification:
- Product parameter: AS5600 magnetic encoder
- Color: As pictures shown.
- Size: approx. 23x23mm(0.91x0.91in)
- Product type: Non-contact magnetic induction Out mode:IIC ,PWM, voltage, etc.
Feature:
- It is made of KB-A grade FR-4 glass fiber board with a thickness of 1.6mm. The board surface is flat and not easy to be bent. Each PCB board has been tested by flying probes before leaving the factory, and the quality is worth relying on.
- Non-contact magnetic induction angle measurement module. High precision, multiple output modes, IIC, PWM, voltage, etc.
- AS5600 is also equipped with an intelligent low power consumption mode, which automatically reduces power consumption. The input pin (DIP) selects the output polarity rotation direction.
AS5600 magnetic encoder module
This module is mainly placed behind the stepper motor to obtain the rotation angle of the stepper motor. This principle is to use the AS5600 magnetic encoding, and then stick a magnet on the main shaft of the stepping motor. Information such as the rotation speed of the spindle can be obtained through magnetic encoding.
Interface description:
VCC: 3.3 V
GND: Power Ground
Out: PWM / analog voltage output
DIR: Rotational direction (grounding=clockwise value increases ; Connect to VCC =Clockwise values decreased)
SCL: IIC communication clock line
SDA: IIC communication data line
GPO: Mode selection (internal pull-up, ground=Programming mode B)
Recommended Products