Shopping Cart

Your cart is empty.

Your cart is empty.

Alstar Middle-Sizes Dovetail with one Screw - for telescopes and Cameras

Free shipping on orders over $29.99

$28.99

$ 13 .99 $13.99

In Stock

About this item

  • The clamp itself can be adapted to a mount; to the counterweight shaft or another dovetail bar; building a double connection
  • For attaching the clamp; 7 bores are available for M6 and 1/4 inch screws; Four M6 bores at 38 mm distance square; All functions; especially the clamping are completely kept; The clamping screw can be used without problems
  • Areal clamping protects the accessories and provides a very stable connection; two drilled but not threaded in the middle with to accommodate screws up to 6 mm in diameter; center to center screw hole spacing is from 27 to 43 mm
  • A generously dimensioned surface with 25 mm width presses the bar against the othe side of the clamp
  • Simply screw the dovetail clamp onto your photo tripod or tripod head; and you can mount your telescope on the tripod



Product Description

Dovetail Clamp with 1 Brass Screw with Pressure Shoe for Mounting Vixen/celestron.

  • With the quick coupling, you can attach your telescope or camera safely.
  • The clamp can be screwed directly to photo tripods. It is especially suited for building double connections where a high load capacity is needed. Through the areal clamping, a high clamping power can be achieved, while your accessories are protected against unaesthetic pressure marks.
  • Whether you want to clamp a telescope from Vixen, Skywatcher, Orion, Teleskop Service, you simply attach a GP level dovetail bar to the telescope. With most telescopes, this bar is already included. The bar is simply clamped with the pressure screw and fixed. You can also shift the telescope in the clamp for achieving an even better equilibrium. The clamp itself can be adapted to a mount, to the counterweight shaft or another dovetail bar, building a double connection.

Advantages in a nutshell

  • The clamp itself can be adapted to a mount, to the counterweight shaft or another dovetail bar, building a double connection.
  • For attaching the clamp, 7 bores are available for M6 and 1/4" screws. Four M6 bores at 38 mm distance square, one M6 bores lengthwise. One 1/4" tripod thread in the middle with two drilled (but not threaded) to accommodate screws up to 6mm in diameter, center-to-center screw hole spacing is from 27 to 43mm. All functions, especially the clamping, are completely kept. The clamping screw can be used without problems.
  • Areal clamping - protects the accessories and provides a very stable connection, two drilled (but not threaded) in the middle with to accommodate screws up to 6mm in diameter, center-to-center screw hole spacing is from 27 to 43mm.
  • A generously dimensioned surface with 25 mm width presses the bar against the othe side of the clamp.
  • Simply screw the dovetail clamp onto your photo tripod or tripod head, and you can mount your telescope on the tripod.

Recommended Products

$19.99

$ 8 .99 $8.99

4.3
Select Option

$125.99

$ 58 .99 $58.99

4.7
Select Option

$243.52

$ 99 .00 $99.00

4.3
Select Option

$211.00

$ 93 .99 $93.99

4.8
Select Option

$197.00

$ 95 .99 $95.99

4.3
Select Option

$179.99

$ 85 .99 $85.99

5.0
Select Option