BZ-181 Specifications:
- Chip:u-blox M10050(Ten Generation Chip)
- Pattern: GPS,GLONASS,BDS,GALILEO,SBAS,QZSS(Default GPS+GLONASS+BDS joint positioning)
- FLASH:Supported
- Frequency:GPS L1,GLONASS L1,BDS L1,GALILEO L1,SBAS L1,QZSS L1
- Power:5V
- Size:18x18x4.8mm(Thinnest point)
- 18x18x6mm(Including thickness of terminal block)
- Interface:SH1.0 4Pin
- Weight:6.9g
- Antenna:Ultrathin Ceramic Antenna / Standard Ceramic Antenna
- Receiving channels:72 search channels
- Baud rate:115200dps
- Output Protocol:NMEA / UBLOX (Dual protocol)
- Output Frequency:1Hz-10Hz. Default 10Hz
- Speed accuracy:0.05m/s
- Horizontal Positioning Accuracy: 2D ACC 1.5m(open air)
- Receiving Sensitivity:Trace-162dBm / Capture -160dBm
- Dynamic characteristics:
- Altitude:50000m
- Speed:500m/s
- Acceleration:4G
- Operating temperature:-40°C~+85°C
- Storage temperature:-40°C~+105°C
- Indicator light:PPS lamp - the lamp does not work when it is not positioned, and the red lamp flashes after 3D positioning
Note:
Due to GPS chip is a new generation chip, flight control needs firmware 4.29 and above, the firmware below 4.29 uses NMEA protocol.
Package Included:
1x BZGNSS BZ-181 GPS Module
