Your cart is empty.
Your cart is empty. Features:
Material: Made of aluminum alloy, sturdy and can carry heavier measuring instruments.
Measurements: fold size(w*h): about 90x26mm/3.54x1.02inch,
unfold size(w*h): about 90x83mm/3.54x3.27inch
Easy to use: You can adjust the height of stand by hand according your need.
Application: The product is suitable for all types of level, floor measure tool, or other lab equipment.
Stable Performance: This lab scissor lift can provides a quite steady lifting performance, very practical.
Specifications:
Type: Lifting Platform
Material: Aluminum Alloy
Color: Silver
Fold Size(W*H): About 90x26mm/3.54x1.02inch
Unfold Size(W*H): About 90x83mm/3.54x3.27inch
Package Included:
1pc x Lifting Platform
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.
Joseph U.
2025-08-29 14:27:20
No issues yet. Seems to open and close fine.
PJ M.
2025-07-31 15:56:40
Worked out great
Louis Hoffman
2025-07-09 13:49:22
The unit was too light weight for even the smallest lift .
Dr. Roger L. McCarthy
2025-06-25 10:18:03
For a product that advertises itself as "sturdy," "stable" and "durable" that "can carry heavy measuring instruments" this stand is highly disappointing. It is rather flimsy. The "Aluminum Alloy" platform is barely 1/16" thick, will probably arrive bent in a few places like mine was, but is so flimsy can many of the bends out with your fingers. It does "work" in that if you turn the screw the platform raises and lowers, although you are going to have to file the sharp edges off the elevation knob as well.
May C
2025-06-24 10:15:35
Not very high quality. But very cheap.
Chuck of all trades
2025-06-21 10:44:52
I ordered this to use for fine height adjustments with a laser level when my needed measurements were lower than a standard tripod would accomodate. The size worked perfectly. However, it is not at all rigid. Front to back and side to side movement of the top is probably 1/8" or more. Quite wobbly. Those tolerances were far too great for my intended use, so I cut some strips of wood to fit in between the top and bottom on the sides to get my desired height then cranked the top down tight. At that point it made a solid platform, but it is not adjustable. So, if you need a precise platform, this is not it. For a use that only needs to raise and lower something to approximate height, this will likely work OK.
james h.
2025-05-22 15:36:29
I used it set the mower deck height front to back work well
Greg Fishback
2025-03-29 12:28:38
The top and bottom plates were both warped causing it to rock and be unstable when set on a hard surface. Not a huge issue for me as I 3d designed & printed replacement plates for my specific needs.
Joseph U.
2025-03-22 13:34:12
No issues yet. Seems to open and close fine.
PJ M.
2025-03-11 18:50:24
Worked out great
Louis Hoffman
2025-03-08 18:44:52
The unit was too light weight for even the smallest lift .
Dr. Roger L. McCarthy
2025-03-02 09:53:35
For a product that advertises itself as "sturdy," "stable" and "durable" that "can carry heavy measuring instruments" this stand is highly disappointing. It is rather flimsy. The "Aluminum Alloy" platform is barely 1/16" thick, will probably arrive bent in a few places like mine was, but is so flimsy can many of the bends out with your fingers. It does "work" in that if you turn the screw the platform raises and lowers, although you are going to have to file the sharp edges off the elevation knob as well.
May C
2025-02-05 16:41:45
Not very high quality. But very cheap.
Chuck of all trades
2025-01-07 16:49:12
I ordered this to use for fine height adjustments with a laser level when my needed measurements were lower than a standard tripod would accomodate. The size worked perfectly. However, it is not at all rigid. Front to back and side to side movement of the top is probably 1/8" or more. Quite wobbly. Those tolerances were far too great for my intended use, so I cut some strips of wood to fit in between the top and bottom on the sides to get my desired height then cranked the top down tight. At that point it made a solid platform, but it is not adjustable. So, if you need a precise platform, this is not it. For a use that only needs to raise and lower something to approximate height, this will likely work OK.
james h.
2024-12-12 17:27:32
I used it set the mower deck height front to back work well
Greg Fishback
2024-12-08 13:10:27
The top and bottom plates were both warped causing it to rock and be unstable when set on a hard surface. Not a huge issue for me as I 3d designed & printed replacement plates for my specific needs.
Recommended Products
