Your cart is empty.
Your cart is empty.Product Description
HB961 Counter/Raster Table
- input singal：switch、pluse（Low pluse：-30V~+0.6V;High pluse：+4V~+30V）
- External sensors: photoelectric tube, near the switches,Hall sensors, angle, line grating displacement sensor, encoder
- Outside the instrument to the sensor for the 5V, 24VDC voltage and DC current 30mA
- To meet the different needs of which we can set different ratio A, ratio b, the initial value of C and the decimal dot
- The current total value, set the count to alarm values, set parameter values count-down function is not lost
Draw-wire position sensor-- CESI-S2000 push pull Series
Features:
- compact size, rugged construction, easy to install
- economic cost, and cost savings for customers
- push pull A B Z signals
- The cylinders, testing machines and other industry has achieved large-scale applications, reliability
The counter display:
standard 96 × 48 × 82mm, 0 .56 inches 6 digitals display Outside the instrument to the sensor for the 5V,24V
Power supply: 85-260VDC/AC
Magnification range: 0.000 to 999.999 Display range: -199999 to 999999
Set zero with external switch control Installation: Snap Optional three kinds of relay output.
Set two controlled values, two relay outputs can be used for control or alarm.
Ratio can be set, determines the ratio between input signal and displayed value. can count / measure speed, via the internal parameter settings. Can automatically reset the time delay.
Application areas:
Linear guide system, the direct determination of the guide element, such as: the length limit, gantry cranes, level measurement Hydraulic system, with the piston-oriented systems or hydraulic cylinder, the displacement sensor deflection of these devices to collect data
The installation dimensions about CESI-S1000P Draw-wire position sensor
How to connect the encoder to HB961 Counter
$78.52
$ 32 .99 $32.99
$272.00
$ 99 .00 $99.00