Your cart is empty.
Your cart is empty. DXL360S Digital Protractor
Features:
1) High accuracy +/- (0.05 Degree + 1%, high resolution 0.01Degree
2) Dual and Single axis with user friendly LCD display angle
3) Rechargeable
4) 4 face V Shape case for easy to fit at the corner or pipe
5) 5 face Magnetic base
6) Audible alarming at settable angle range
Digital inclinometer specifications:
Accuracy: +/- (0.05 Degree + 1%)
Measuring range: Single axis: 360° Dual axis: +/- 40° degree
Resolution: 0.01Degree
Response time: Audio sound: 60dB @ 30cm
Operating temperature: 0 to 50 Deg C
Storage temperature: -10 to 60Deg C
User Interface: Mono-color LCD with backlight
Supply Power: Rechargeable Li-Ion Battery, 3.7Volt.
Charger port: 5V 500mA Mini type-B USB port
Power Consumption: Standby: 200uA, Operation: 20mA.
Standby Battery Life: 2000 hours
Operating Battery Life: 40 hours
Dimensions (in mm): 70(L) x 70(W) x 28(H)
Magnetic Base: affix at the bottom and back.
Application:
-Interior decoration
-Construction area
-Plumbing
-Floors & Stairs
-Woodwork
Including:
1 pcs DXL360S Protractor
Benjamin Hammerschmitt
2025-09-03 14:17:43
I have a Wyler Clinotronic S and compared the two. After calibrating the unit, I found it to be very accurate for the available resolution in both single and dual axis modes. The gyroscope is a feature that looks cool for checking rotation positions but I haven’t thought of ways to test it yet. It won’t replace high end counterparts but it is still very useful for getting close enough before needing the high end tools. You won’t have to worry much about dropping an $80 tool compared to a $4100 tool.
Thorsten Claus
2025-08-22 17:05:24
++ the display refresh rate is fine, could be faster, but then your OCD kicks in ;) I wish the xy-axis measurement would also work when attaching vertically (upright on one of the four sides), but it only works if you have it flat on the ground on it's back. Once you tilt over a certain angle it switches to 1-axis only.++ The fake bubble display is helpful -- I didn't think it would be, but it is :) I also like that the display shows + and - degrees. I had another 1-axis one and that one would show, for example, "89°" for both left and right of 90°. This one shows very clearly the direction, nice.++ The device has an easy-to-navigate menu for calibration and alarm beeps, totally awesome, didn't see that in the description: you can enable a beep if the gauge is either *within* a certain degree or *outside* a certain degree, and also change the necessary accuracy. For example, if you set it to 24°, +-0.35°, INSIDE, then the gauge will beep between 23.65° and 24.35°. When setting to OUTSIDE, the beeping will stop inside this range. There are different settings for 1-axis, x-axis, y-axis! What is missing is enabling the beep ONLY for the x or ONLY for the y axis, in case you are aligning the scale to zero in one axis and are measuring the other axis' inclination.-- The display has a thin plastic layer and is a bit wobbly. I would suggest to leave the protective plastic layer that it ships with on it to protect it better from scratches.
Customer
2025-07-22 13:39:57
The media could not be loaded.
Customer
2025-05-22 15:58:44
This digital protractor is excellent quality and has been invaluable for aligning saw blades and my other working needs. I like that it’s USB chargeable - no more batteries. The screen is very easy to read. It did take a little bit of research to learn how to use it as the instructions are written for someone who’s already familiar with digital protractors.
R S
2025-04-12 16:44:21
Unit will display a .3 degree difference for a given angle depending on which way the unit is oriented.Calibrating the unit does not remove the discrepancy. Does not come close to advertised accuracy, and.01 degree resolution of an inaccurate number is meaningless. I may have received a faulty unit, andwould return it if it was still within the return window.
clarksbrother
2025-03-31 15:34:58
These are absolutely fantastic. We use these to precisely level camera jibs to calibrate them for augmented reality graphics on television. With that usage, the difference between 0.00° and 0.02° is actually huge in terms of how things look on TV. A few important notes, it's extremely important to calibrate these devices every once in a while (or before each use if hundredths of a degree matter). This is a very simple procedure that takes 20 seconds from within the menu. Second, there is drift on these, meaning that, it will take a few seconds to dial into the final degree reading (in terms of the hundredths of a degree, it gets to within .05 degrees very quickly but will often drift to the final reading over about 5-10 seconds). The fact they work and rotate the display on all sides makes these invaluable. If precision is key, this is definitely a good buy.
N
2025-02-24 18:35:05
Easy to use. Matches other instruments, as much as I can test as this is much more precise. Also, readings are the same on different days so I assume accuracy is good.I bought this for setting up my telescope. First I level the mount using the digital bubble level feature. And then I realized I can set my declination whenever I change location by setting it on the top of my scope tube which is a nice added bonus for quick polar alignment.I also used it for flooring install, cabinet install, range hood install. Essentially, whenever I need to know if something is level, this tool comes out.Menu is a tad clunky but really not difficult to manage.Would buy again and recommend.
Christopher Wright
2024-12-14 16:16:37
Works great. A little finicky and you have to give it time to settle but overall awesome. It works perfectly when you mount it to a precision straight bar to increase surface area and reduce line error
Recommended Products
