CSE-H55N2 is an industrial Serial to Ethernet converter that converts data received from RS422/RS485 interface to TCP/UDP packet and vice versa.
APPLICATIONS:
- Connect two serial devices through LAN or Internet (known as Serial Tunneling feature)
- Connect a serial device to a serial software on PC through LAN or Internet
- Connect a serial device to a TCP/UDP software on PC through LAN or Internet
FEATURES:
- Separator settings for packet fragmentation
- Protocols: IPv4 / IPv6 dual stack, TCP, UDP, Telnet, ICMP, ARP / DHCP, PPPoE, DNS, DDNS, ICMPv6 / TCPv6 / UDPv6
- Telnet COM Port Control Option (RFC 2217)
- SSL (Secure Sockets Layer)
- MAC/IP filtering
- Industrial temperature range (-40℃ ~ +85℃)
- Reverse voltage/ Over current/ Surge protection
- Hardware design to improve stability again noise and electrical damage
- Virtual COM port (ezVSP) provided
SERIAL INTERFACE:
- Connector: 3.5mm Pitch Terminal Block
- RS422: TX+, TX-, RX+, RX-, GND with embedded 3.9K biasing resistors and TVS
- RS485: TRX+, TRX-, GND with embedded 3.9K biasing resistors and TVS
- Baudrate: 300bps ~ 230,400bps
- Data Bits: 8 bits, 7 bits
- Parity: None, Even, Odd, Mark, Space
- Stop Bit: 1, 1.5, 2
NETWORK INTERFACE:
- 10Base-T/100Base-TX Ethernet (RJ45)
- Ethernet Speed Auto Sense
- 1:1 or Cross-over Cable Auto Sense
