Your cart is empty.
Your cart is empty.Product Description
Widely Compatible with Large Screen Devices
The iPad and phone tripod mount adapter has the largest jaw opening 10.6 inch/270mm, which fits most size screen tablets as follows.
✔For iPad 9 8 7 6 5 4 3 2 1, iPad mini 5 4 3 2 1, iPad Pro 9.7”/10.5”/11"/ 12.9", iPad air 4 3 2 1, iPad 8 7 6 5 4 3 2
✔ For Samsung Galaxy Tab S6 S5 S4 S3 S2 S E A 4 3 2 Pro (7", 8", 8.4", 9.6", 9.7" 10.1" 10.5")
✔ For Asus Zenpad 3S Z10 S C 10 Z8s Z8, Memo Pad 8/FHD 10, VivoTab 8, 7" 7.9" 8" 9.7" 10.1" Tablet
✔ For Samsung tab, Surface Pro, Nexus, large cellphone and more
*Only support vertical mounting for most phones.
*Only support horizontal mounting for some larger tablets over 11.0" such as iPad Pro 12.9".
Features
Vertical and Horizontal Application
This ipad tripod mount for video recording supports portrait and horizontal orientations for versatile viewing.
360° Angle Adjustable
This tablet tripod mount comes with a swivel ball head, making it easy to adjust your devices in any angle and position.
Case Friendly
0.51” width tablet clamp holder claw allows holding iPad with case. If you use it for devices with case, please check the thickness of devices with case if is less than 0.51”.（Not suitable for iPad in an Otter box.)
Reserved Charging Space
There are reserved charging space for this ipad pro tripod mount jaws for recording videos while charging.
Foldable Jaws
Jaws on both sides of this phone tripod mount is foldable. You can carry it everywhere for its compact size.
Standard 1/4"-20 Thread
Screw hole on the bottom of the ball head of this tablet mount compatibles with any standard tripods with 1/4"-20 thread, including steering gimbal,monopod,tripod stand,selfie stick,ring light tripod and so on.
Tips
1.Please allow 0.39-0.79 inch differs due to manual measurement.
2.Tripod is not included in the package.
3.After mounting the device in the tablet holder for tripod, make sure the knob screw is completely being locked.
4.Please tighten the ball head knob after adjusting the angle of the ball head.
5.It Doesn't fit for microphone stands or any tripod with 3/8", 5/8".
6.Not suitable for iPad in an Otter box.
Amanda Randolph
2025-08-29 16:42:19
This purchased arrived as scheduled and is as pictured. It's easy to connect together and attach/mount to a tripod stand. The size is great, it has great tension to hold tablets or phones. It appears sturdy, but I wouldn't suggest throwing it around. The design, build, and weight is good; it is mobile if you want to take a long with you.
DenverNative75
2025-07-31 17:41:13
As photographers and digital content creators we have about 15 different tripods, monopods, gimbals, and micro stands. This holder is one of the strongest we have had and we use it to hold an iPad. We mounted the durable device holder to a tripod so we can position an iPad and follow along to online workouts.The set screw allows the user to hold their device securely without concern of it falling out. Also, the swivel head is a nice feature to quickly adjust the angle of the device.The versality of the clamp is excellent as it allows you to position the device horizontally or vertically.Excellent product for the price!
Vincent
2025-07-23 12:01:46
The item does the job as it's expected. It weight is fine. Pretty easy to use. It does adjust fairly well. Its design may need more improvements. Material is mainly plastic.
DandysoapDIY
2025-07-18 11:15:06
The media could not be loaded.
Techie
2025-06-13 09:39:28
This is nice kit. Using it for iPad mini. good materials, design, and value. it will hold up. Will note that it is flawless for use on short width of device but when applied to long dimension it must be offset to the side a bit or it constantly presses the buttons on top which I am sure will hurt your iPad experience in many ways. Overcome-able but be aware.
Dennis
2025-04-12 17:13:49
One feature I want in a camera stand is for my iPad to fit. I’ve bought camera stand mounts in the past. Those were OK, but using them vertically wasn’t an option because they kept slipping out. I don’t have to worry about that with this. Only issue encountered is unscrewing the camera mount. It doesn’t break, but it can come apart if unscrewed too much (very negligible issue). it does however, keep my iPad in a tight grip when being held vertically. I have a very slim case on my iPad, so that probably helps. Overall, I’m satisfied.I decided to upgrade to the iPad Pro 13 inch, and vertically, it’s incompatible for obvious reasons. However, since the 13 inch has a camera on the side, this works pretty good with it, as the top of the clamp doesn’t obscure the camera. It has some horizontal use too. You could make vlog videos with this no problem with this stand attachment
Pete to C
2025-04-05 14:32:03
I'm debating on returning this. On one hand, its a solid feeling piece. Yeah, its plastic but it has good weight. The spring loaded arm doesn't feel all that special though to the point of kinda cheap feeling. I think the spring will start losing its strength with a decent amount of usage. The ball mount feels very solid.I think it'll be good with an iPad Mini or the lighter weight iPads. My problem is I bought this more to use with my iPhone 12 Pro Max. The only way this will fit on the mount is gripping it "long ways". The problem with this is you can see the plastic from the mount on one of the lenses. I tried to shift the phone to avoid the obstruction but it just got to the point where the phone wasn't secured well. I'm not sure I want an expensive phone on the mount.
Cam C
2025-01-20 17:29:57
The universal camera mount makes this super versatile. There are so many camera mounts you can use it with. I also prefer the thumb knob clamp over spring mounts.I really can't find any fault with this mount. I highly recommend it.Have used this mount a lot for doing zoom meetings with a tripod.
MAM
2024-12-13 10:21:46
En general bien, buen producto; solo consideren que debes quitarle los protectores para que tenga un buen agarre de la iPad o protectores que no sean tan gruesos que no permitan el agarre correcto y en consecuencia se lo tengas que quitar para poder ponerle. Consideren opciones con tripié que pueden salir casi en el mismo costo, ya que este no trae tripié, solo el que agarra la iPad.
KR
2024-12-11 11:21:56
It's reasonably built, for cost. Not professional grade,but that stuff is very costly. I liked that it'll hold my Samsung Galaxy Tab A7 in its rubber armor case. If you need a holder/adapter to mount your tablet on a tripod, for photography or convenience, this'll do nicely.
Ewerton Civiero
2024-12-10 15:03:51
O produto é excelente. Exatamente como no anúncio. Veio bem embalado e é de ótima qualidade.
Patrick
2024-11-27 13:09:02
Très bien conçu.
Anonym
2024-11-12 10:43:16
Sehr gute Halterung.
Recommended Products