Your cart is empty.
Your cart is empty.Product Description
Description:
Perfect for flawless production of Shaker rails and stiles for cabinet doors, flooring, paneling and many other projects. This set of bits are designed to raise or lower the cutter for corresponding tongue or groove. This operates like a reversible glue joint; cut one piece of stock face up and the corresponding face down for a perfect match. Carbide tipped. The gap in between Groove can be adjustable with using the fine adjustment shims (Thickness: 0.2mm, 0.5mm) comes with the set. Customer can adjust the fit with the tongue whether you’re using hardwood, undersized plywood or a veneer product.
Specification:
Cutting Edge Material: Kowood High Grade Carbide
Color: yellow
Shank Dia.: 1/4” (6.35mm)
Bearing Dia.: 7/8" (22.225mm)
Cutting Length: 1/2”-3/4” (12.7-19.05mm) *Groove bit
1/4” (6.35mm) #Tongue bit
Package included:
1x Tongue Router Bit
1x Groove Router Bit
2x Adjustment Gasket (0.2mm, 0.5mm)
Safety instructions:
1. Always wear eye protection
2. Always using safety cover provided by benchtop router table
3. Do not wear gloves to avoid hazard of getting caught in the tool and pulling your hand in to get mangled during bit spinning
4. Examine the bits before use for cracks or chips. Do not use damaged or bull bits.
5. Make sure bits are properly secured in collect and reach the indicator mark (“K” Mark)
6. This product is designed for portable or benchtop router machines. Please do not use in another machine (etc. Driller)
7. Max. Rpm in 16000
8. Lock the shank up to the K mark
Note:
Please try the testing piece for fixture in between Tongue and Groove before work on the actual project. It is adjustable by change gasket in difference thickness or any combination. Due to the lighting on photo, the picture may not reflect the actual color of the item.
1 Razor sharp cutting edges for smooth cuts.
2 Designed and maufactorated to eliminates friction and chatter. Fit all Handheld and table router with 1/4" shank size
3 Kowood Plus design shear angles for chip clearance.
4 Ball bearing guides on selected edging and trimming bits prevent burning and marring.
Willithica
2025-08-26 13:44:41
Not much to say these are great bits and have made doing tongue and groove on the router really easy they are still sharp and functioning great would definitely buy again I've gotten my money's worth already.
Ryan R.
2025-08-14 16:19:44
I bought 13 pressure treated 1"x6"x8ft boards and turned into a tongue and groove exterior ceiling for an area on a porch to mount a TV at my most recent job. The single female slot obviously cut easier than the double, still both cut very well. Going to want to use a strong full size router. My bosch colt router wasn't enough to cut it. However my large full size metabo and these bits ripped through no problem and helped me built a great job. Really impressed for the price. Extremely impressed I should say. The fit nice and tight. Perfect and exactly what I wanted. Over 100 ft on each and still super sharp.
Nowall
2025-07-11 12:16:23
I fear product May not last this long. I would like it to, but I guess I’ll cross that road when I get there.
Joe Cook
2025-05-28 19:03:20
They make good clean cuts so wood attaches with out need for additional work
DELOS HOWARD
2025-04-25 20:23:19
These worked perfectly
John Seaman
2025-03-31 11:44:10
Like most new router bits that one has not used before there is some learning curve, and one can count on mistakes and at least a very sharp cutting surface out of the box. The trick here was to gradually cut the tongue and the groove in increments. A pass to cut the full 1/2 inch slot left lots of tear out. Passing the hard maple through in three smaller bites did fairly well. I don't know if the CMT or Freud bits for $75 or more would require the same process. For $20, and showing up the next day (!) it will be "good enough" for my current project. If I get into further projects like what I'm doing now I would likely spend the money for a better bit and get a jig as well to ensure more accuracy.
tyree hernandez
2025-03-16 15:47:40
Blades are very sharp.
Argemiro DIAZ
2025-03-14 10:37:03
Excellent seller, quick shipping, as described, great deal, I recommend!. Thank you!.
Client d'
2025-02-21 14:23:36
satisfait merci
Wayne D.
2025-01-25 14:09:05
It did the job for which i bought it for. Would buy from them again if needed.
Recommended Products
$109.99
$ 44 .99 $44.99
$22.95
$ 9 .99 $9.99
$117.48
$ 54 .99 $54.99