Your cart is empty.
Your cart is empty.The invision usm universal studio microphone shock mount from Rycote provides a discreet, low-profile way to mount practically any microphone with a diameter of 18-55mm. The mount uses Rycote's patented "lyre" suspension system, which does not use any runner or elastic components to isolate the mic. Instead, the unique shape gives the mount specific compliance to the mic to prevent handling noise from reaching the capsule. The high-grade materials used in constructing the mount give it an exceptionally wide working temperature of -31deg. F to over 212deg. F (-35deg.C to 100deg.C), far exceeding the range of typical elastic or rubber shock mounts. The mount retains all of the flexibility, balance and performance that you would expect from a Rycote suspension system. Instead, unique shape gives the mount specific compliance to the mic to prevent handling noise from reaching the capsule. High-grade materials give the mount an exceptionally wide working temperature of -31deg.F to over 212deg.F (-35deg.C to 100deg.C), far exceeding the range of typical elastic or rubber shock mounts.
Jeffery L. Smith
2025-09-02 12:07:44
If you have a big microphone, this will hold it securely and will work well with the added Rycote foam pop filter (not included). Hold the microphone securely and allows relatively quick removal of the mic between sessions.
mykla
2025-08-12 13:28:57
Super easy to set up and adjust for different microphones, looks great, much sturdier than it seems. Highly recommended!
Andrew Morse
2025-07-20 13:32:00
The lyre mount mechanism is great and supports a wide variety of microphones. The universal mounting screws are rubber coated and have angle adjustable ends so they make secure contact regardless of your mic's shape or dimensions. I feel my mic is secure and will not slip or come loose during use.I don't think it provides quite as good isolation from low frequency thumps and bumps as other flexible band style mounts. You should experiment with the mounting point because the isolation seems to improve if you find the center of mass. The trade off to this slightly lower isolation is you get to mount mic at any angle you wish without it flopping around. This is my pet peeve with most other flexible mounts. Not an issue with this mount!
Brett
2025-07-16 10:30:10
Used this to mount up an ElectroVoice RE20, and it worked wonderfullyThe mount system is cool, no elastic bands. So i hope the longevity will be good.Was super easy to rig up, and works wonderfully.I can tap on the boom arm, the desk, and throw the whole rig all over the place. Mic ain’t picking up a thing.Excellent product
The Good Doctor!
2025-07-07 12:39:52
I was all set to be impressed with this shock mount based on the reviews and the price as compared to other shock mounts. I do like the fact that it will relatively securely hold my Apogee HypeMIC but the hold is not as secure as I would expect given this shock mounts reputation as one of the benchmark products in this niche.As to the function of the shock mount, I don't detect any difference in the sound deadening, but I will continue to monitor it. My studio is a relatively dead room with lots of sound deadening in place and the ambient sound is pretty close to professionally silent. I use a relatively high quality RODE Arm and all of the proper mounting sets. That said, there is some arm movement sound and that is what I hoped to isolate, if not eliminate.That simply was not the outcome thus far. I will keep monitoring it, but I will say, I think the primary issue with the outcome thus far is that they don't use elastic bands, instead, they use plastic shock absorbers. I get how these will last longer, but they aren't remotely as effective at mitigating shock as elastic bands.That is what it is, and for now, I grade this two stars. I will adjust this review if it proves to improve my sound recording quality.
Mark King
2025-06-23 15:13:32
These are very nice microphone shock mounts and the price has dropped in half on them from when they were introduced. This one is intended for microphones up to 55mm in diameter. I have over 50 microphones and it's nice to have a shock mount that works with so many models.I have two of these Rycote models currently and I'm going to get more next year with our new budget.Measure your mic carefully and buy these with confidence, they're A LOT better than the cheap shock mounts from China.Good music to all!
wheflin
2025-06-22 16:12:27
It fits both and didn't need to mortgage my house to get the Neumann mount.Love it. Been using it for several months and it works phenomenal on both, but use it mainly with the 416.
Ray C.
2025-06-04 12:43:32
See picture included.....I would love to give a review but I can't use the product. The 5/8 thread adapter fits into mount however the company apparently didn't thread the inside. I would love to call them to ask if I'm manually supposed to groove in the threads with my custom built threader machine, but the phone number is 29 digits and impossible to call.Always my luck!!!
ã¹ã£ã“ã¹ã“
2025-05-20 17:14:12
ã—ã£ã‹ã‚Šå›ºå®šå‡ºæ¥ã¾ã™ãŒã€å–り外ã—ã€å›ºå®šãŒé¢å€’ã§ã™ã安価ã§æ‰‹ã«å…¥ã‚‹ã®ã§ã‚ãŒã¾ã¾è¨€ãˆã¾ã›ã‚“ãŒç¬‘
Patrick Hayes
2025-04-25 20:55:13
Bought this to hold my vintage 1969 Neumann U87 and wasn't sure it'd be totally up to the job based on the price. However I would buy another one of these in a flash as they are far far better value than the Neumann mounts (totally overpriced) and very sturdy.
Billy
2025-03-20 20:55:11
Some of the best shockmounts on the market. Supports heavy microphones (such as the Aston Spirit) due to its design, and incredibly durable.
Audio-post
2025-02-22 14:48:29
This is really the rolls Royce of shock mounts.No elastic.Looks good and works really well.Use it for Rode Broadcaster and NT1a
Playmaker Sound
2024-12-20 11:03:26
love this product stylish and easy to use
Recommended Products
