Shopping Cart

Your cart is empty.

Your cart is empty.

USB to I2C MCU-2112 CP2112 debug Board Communication Module CP2112

5.0 Write Review
Free shipping on orders over $29.99

$9.99

$ 4 .99 $4.99

In Stock

About this item

  • The CP2112 devices have the following features: Single-Chip HID USB to SMBus Master Bridge Integrated USB transceiver; no external resistors or crystal required SMBus master device GPIO can be configured as Input/Output and Open-Drain/ Push-Pull 512 Byte SMBus data buffer Integrated 194 Byte One-Time Programmable ROM for storing customizable product information On-chip power-on reset circuit On-chip voltage regulator: 3.45 V output
  • USB Peripheral Function Controller USB Specification 2.0 compliant; full-speed (12 Mbps) USB Suspend states supported via SUSPEND and /SUSPEND pins
  • HID Interface Standard USB class device requires no custom driver Supported on Windows, Mac, and Linux Open access to interface specification
  • GPIO Interface Features 8 GPIO pins with configurable options Usable as inputs, open-drain or push-pull outputs Configurable clock output for external devices 48 MHz to 94 kHz Toggle LED during SMBus reads Toggle LED during SMBus writes
  • SMBus Configuration Options Configurable Clock Speed Device Address: 7-bit value that is the slave address of the CP2112. The device will only ACK this address, but will not respond to any read/write requests Read/Write Timeouts SCL Low Timeout Retry Counter Timeout
  • To download the GUI software at the following link: https://drive.google.com/file/d/1kM8XQtsV4LkhVfDbWP3qEHTyZdP2ZqVh/view?usp=share_link


Módulo de comunicación USB a I2C CP2112 Detalles del artículo: Número de modelo: CP2112. Tipo de artículo: placa base. Estos controladores de puente USB a SMBus altamente integrados proporcionan una solución sencilla para agregar USB utilizando un mínimo de componentes y espacio en PCB. El CP2112 incluye un controlador de funciones USB 2.0 de velocidad completa, un transceptor USB, un oscilador y un total de 8 GPIO. Todas las opciones de personalización y configuración se pueden seleccionar mediante un sencillo configurador basado en GUI. Al eliminar la necesidad de un desarrollo complejo de firmware y controladores, los dispositivos CP2112 permiten una conectividad USB rápida con un mínimo esfuerzo de desarrollo.