Your cart is empty.
Your cart is empty. Product Introduction
The WJL-6000 electronic Freon leak detector redefines accuracy and reliability, enhances your detection experience, and is an indispensable tool for HVAC systems and refrigeration units.
Scope of use
Whether it is CFC of R12 and R11, HCFC of R22 and R123, or HFC of R134a and R410a, it can be detected. The detection range exceeds common mixtures such as AZ-50, HP62, MP39, etc.
Product advantages
—— 7 degrees adjustable sensitivity, which can automatically adjust to the best detection state.
—— Built-in voltage, ultra-low power IC design, more stable
—— Automatic reset at power on
—— Accurate display of leakage location
—— Dual indication of sound and visual gas leak
—— Rapid detection, detection only takes one minute
—— Flexible probe of about 7.9 inches can detect difficult and hard-to-reach areas.
Product specifications
—— Operating temperature: 32 degrees Fahrenheit ~ 125 degrees Fahrenheit.
—— Maximum sensitivity: 0.21 ounces/year, suitable for all halides.
—— Power supply: 6V DC.
—— Warm-up time: 5-10 seconds.
—— Reset time: 2 to 10 seconds.
—— Display mode: Mechanical indication.
Package contents
—— 1*Carrying bag.
—— 1*Electronic Freon leak detector.
—— 1*User manual.
—— 2*Spotlights (two colors).
BuyerThatDoesResearchFirst
2025-07-17 12:54:52
I got this detector because it comes with a snap-on mounted UV flashlight. Before I was using UV dies exclusively to visually locate leaks. It works extremely well on the pipes (bad brazing, leaky valves) but not precisely on evaporators or condensers which by definition have a huge area for die to settle and hence it's hard to pinpoint the exact location. This tool runs on 4 batteries and is very simple to use. Once you set the sensitivity knob to the desired level it will start beeping and flashing red LED. The closer you bring the tip of the sensor to the leak the higher frequency of the beeping will be. Small flashlight snaps on to the gooseneck. It has UV and regular lighting modes. Detector came with a nice belt mounted carrying case.
Tony C. Ho
2025-04-01 12:37:37
The WJL-6000 Pro Freon Halogen Tester is an excellent tool for detecting halogen gas leaks with impressive accuracy and reliability. Designed for use with various refrigerants like R134a, R410a, and R22a, this tester quickly identifies even the smallest leaks, as demonstrated when it successfully pinpointed a tiny leak at the Schrader valve in an R134a system. The indicator light provides clear and immediate feedback, making it easy to use for HVAC professionals and DIYers alike. Compact and efficient, this leak detector is a must-have for maintaining air conditioning and refrigeration systems with confidence.
James mckelvy
2025-01-30 10:28:45
This has become my go-to for AC diagnostics. It's great to carry and use!
sebastian
2025-01-27 11:42:09
Works great, takes only 60 seconds to warm up, found the leak within 30 seconds of first use, replaced the faulty o-ring on the low pressure side of the firewall, and then it was done!
Recommended Products
