Your cart is empty.
Your cart is empty.The Yonico 12247 rail and stile router bit set will cut rail and stile for cabinet doors in a contemporary bevel design. Use with up to 7/8" Stock. Two flute carbide cutters & 1/2" Shanks. Fully enclosed ball bearing guides allow for precise cuts without the use of a fence. Yonico router bits are manufactured with solid hardened steel bodies and C3 micrograin carbide for professional, efficient routing.
217 craft's
2025-09-05 12:58:26
Yonico is a god sent tool company. I can vouch only for their router bits. Amazing prices for quality tools. These bits cost about a third of the big names bits and are comparable in quality. Well maybe not but 3 of these will most likely out last one of the big name brands. So its obviously more feasible to shop yonico. This set in particular i used to make red oak cabinet doors. Worked as it should. I use 3/4 lumber so all i do is lower each bit 1/16 below the router table top rails and stiles match up perfect. Not worth their weight in gold but definitely a great product.
Linda Gombac
2025-09-04 10:33:58
We had to fabricate fridge panels and the bits worked great. The cost of the bits was very economical and the cost was passed onto the client.
danman bz
2025-07-25 15:31:47
excellent what can i say for the price i payed for two bits, i just did four raised panels cabinet doors this weekend past and man did they came out well the joint is well tight fitted so you dont need to use a whole lot of glue. buy and you wont get disappointed worth the money recommended for pro's and diyers alike. update these bits dull very quickly after those four doors were made went to use the bit again and man were they dull, i guess u get what you pay for as the saying goes. i will pay a little more well almost double the price and go with kempston router bits they are quality
Melanie Smith
2025-07-16 13:02:57
My customer liked the look of this cutter profile, so I gave it a chance. The cope and profile make a really nice joint. For the price, I was expecting these to be worn out after the project I bought them for. I made 20 kitchen cabinet doors and these cutters have many more doors left in them.
Tom Fabis
2025-07-13 12:31:30
These profiles are a poor match. They are of no use.
Timothy Bond
2025-07-11 14:00:45
Item arrived on time and was packaged well. The two bits were in a nice wooden box to protect them from damage. Well worth the money. I would highly recommend.
Adrian Chaves Soto
2025-05-31 17:25:32
Me agradado bastante, con sólo sostener las cuchillas en la mano se nota su calidad, esto en el peso y en sà las piezas se ven muy bien Fabricadas, exelente inversión, no me arrepiento.
Jason StL
2025-05-02 13:08:10
You can in fact make a decent rail and stile door with a $40 set of bits however be prepared to spend some time with the set up. Using the bearings on the bits to control the depth of cut left me about a 1/32 gap on the face of the joint. Seems like the slot cutter is a bit long or the bearing on the stile cutter is too big. To compensate I held the router fence out from the bearing on the coping bit to shorten the tenon and all good. MAKE A SETUP BLOCK! You get what you pay for in this instance for sure.
HME
2025-02-26 16:12:02
good quality. Love it. I think, i by more from bestgle
Jerzy
2025-01-13 15:45:28
Great product, good price, quick delivery. Thank you.
Recommended Products
$109.99
$ 44 .99 $44.99
$41.95
$ 22 .99 $22.99
$66.99
$ 29 .99 $29.99