Shopping Cart

Your cart is empty.

Your cart is empty.

0F97190SRV Voltage Regulator PCB Fit for Generac Generator 81918 83049 083049 0830490SRV 83049GS SRV83049 F9719 0F9719

5.0 Write Review
Free shipping on orders over $29.99

$68.47

$ 27 .99 $27.99

In Stock
  • [Part Number]: 0F97190SRV Voltage Regulator. Replaces and interchanges with 81918, 83049, 083049 0830490SRV, 83049GS, SRV83049, F9719, 0F9719, 0F97190SRV models.This regulator is not suitable for 0G2885/0G2885A/0G28850SRV voltage regulators. Please check carefully before purchasing whether the model is consistent.
  • [Fit]: Fits 0F9719, 083049 and 083048 except that the 083048 does not have a cooling fin on the back of the regulator. These regulators are interchangeable, but the 083049 and 0F9719 are thicker due to the heat sink, and longer bolts are required to replace the 083048.
  • [Quantity]: Products are rigorously tested before they leave the factory, and it is safe to use our products.
  • [Note]: After installing the new voltage regulator, you must determine if the frequency is correct. Set "mechanical governors" to 62Hz at no load. "Electronic governors" set to 60Hz at no load. After you determine the hertz are correct, measure the AC output. The voltage should be 124VAC at 62Hz with no load or 120VAC at 60Hz with no load. If the voltage is either high or low, adjust the brass screw on the blue trim potentiometer next to the red LED light to the correct voltage accordingly.
  • [After-sales service]: We guarantee the quality of our products for 30 days. Please contact us if there is any problem with the quality of the product.


Product Description

AK098-1

Voltage Regulator PCB Fit

Fits 0F9719, 083049 and 083048 except that the 083048 does not have a cooling fin on the back of the regulator. These regulators are interchangeable, but the 083049 and 0F9719 are thicker due to the heat sink, and longer bolts are required to replace the 083048.

ak098
AK098-2
AK098-3
AK098-4