Your cart is empty.
Your cart is empty.The Flex-A-Lite 1 Inch Fan Spacer Kit helps you to correctly position a belt-driven cooling fan to ensure cooling performance and avoid damage to the fan. Required for all Flex-A-Lite belt-driven fan car parts, this aluminum spacer has a large load-bearing surface and is machined to a soft radius around the edges to reduce point loading and prevent stress cracking on the radiator fan center star. This automotive spacer kit features a 5/8-inch pilot hole and includes the bolts and washers needed to install the fan and fan spacer. You can use up to three 1-inch spacers to achieve the proper fan position. This auto parts spacer kit comes with a one-year manufacturer warranty, providing peace of mind for car enthusiasts who demand quality and reliability.
meyerslmt
2025-08-15 10:34:58
Good fit, but needed a different size. Kept it for a spare. All hardware came with it.
Customer
2025-08-13 21:32:21
The spacing was correct which allowed me to get away from a fan clutch and use a flex fan. good product.
Customer
2025-07-10 12:47:18
Works well on a Ford 302
Brad G
2025-07-03 15:08:13
Works good
TDaddy
2025-06-07 10:23:31
This was the exact spacer needed for a Jeep Grand Cherokee with 4.7L V8. I used a Flex-a-Lite 1518 Fan with an 851 adapter and this spacer for a perfect fit. Very easy installation using a rental fan clutch removal tool and a 12" adjustable wrench to remove the fan clutch. I did not follow the instructions per the manufacturer. It says to install the adapter and then the spacer then the fan. The bolts with the spacer are the exact length for the installation so I attached the fan, spacer, and bolts to the adapter and torqued the bolts per the manufacturer. The assembly fit easily between the shroud and the water pump and when all was done the position of the fan was exact. The only negative was the adapter is too large for any wrench that I had but because the engine rotation is opposite the adapter thread I tightened the fan assembly by hand and the engine did the rest. Don't do that if you do not feel comfortable but it is the same principle as installing a saw blade on a table saw. Also, Amazon specifically showed this would not fit my Jeep, but the factory said it would work.The fan works great, really great! It is so much light than the stock fan and there is no big, heavy clutch robbing horsepower. My temp guage shows the engine running cooler and no change when pulling a 5' x 8' trailer with appliances.
Drew V
2025-05-26 10:40:01
not needed for flex-a-lite nylon fan for Jeep 4.0 install...as they stated on web site.Need some small modifications to make it fit like old one. cut out center and drill new holes. only took me about 30 min...much lighter and durable than old stock garbage
Anthony Thompson
2025-04-15 17:49:06
Great product love the product
Robert Waldrip
2025-03-29 17:11:33
Just the right size to do the job for what I wanted
B.N.
2025-02-04 10:35:33
Fits my clutch fan just right and moves the fan closer to the rad.A definite cooling improvement.
Larry
2025-01-25 15:18:11
Would buy again if needed.
Kim Jones
2025-01-18 13:48:42
Perfect fit
Robert
2025-01-07 17:58:23
Arrived in less then a week and fit perfectly and looks good
Sabrina
2024-12-22 15:42:24
Nice fitting extension for flexolite fans. Bolts are grade 5, but should be grade 8 for the amount of torque subjected on the fan. Do yourself a favour and buy proper grade 8 bolts and throw the ones they send with the package before they snap and go through your radiator
Recommended Products
$60.00
$ 29 .99 $29.99
$62.99
$ 25 .99 $25.99