Your cart is empty.
Your cart is empty.From the manufacturer
Standard Barbell
Standard barbells are available of three lengths and two colors.
Made from sturdy steel with a chrome finish for durability. Ideal for home gym use for squats, dumbbell lifting, rowing, bench press and other exercise programmes.
Barbell fits all standard plates at 1" hole diameter.
- Barbell only, plates and collars not included.
- Barbell length: 7 FT
- Barbell diameter: 0.97‘’
- Weight capacity: 350 lbs
Knurled design
Knurled design increases friction and grip to help you grab the barbell with a good non-slip effect.
Bearing
Featuring a black chrome-plated finish, the bearings allow for smoother, easier movement, reducing stress and injury to wrists or forearms.
0.97 inches in diameter
Accommodates all standard plates at 1" hole diameter for a full body workout for bench presses, squats, deadlifts and more.
J.R.
2025-09-05 20:25:40
The media could not be loaded.
Chase
2025-09-04 18:00:05
Contrary to a lot of what I'm seeing regarding the shipping/delivery of the bar, mine was delivered about 3-4 days after I ordered it. Also, to address any dimensional questions... I got the 6 ft long, 1 inch in diameter bar and the distance between collars is about 49 inches, so it WILL fit comfortably on any standard-sized bench/squat rack. This is an excellent barbell- very durable and robust. Given the considerably low price, I was a little unsure of how the quality would be prior to purchasing. I can safely say that I have put around 200 lbs on the bar without it bending and all weights stayed secure (with clips of course). I would agree with those that say it can handle over 300 lbs, easily. If shipping goes as it did with mine, you will not be disappointed with this barbell!
Customer
2025-08-31 16:36:40
My son gave me a weight set with a 2 piece bar. I got to the max amount I could lift with the bar. At 68, this is my first time lifting. (Started 6 months ago.) I was two pounds short of pressing my weight, (133) so I wanted to get more weights, because there was no room on the 5 foot bar. So, I need a new barbell first. This bar is awesome, weighs 15 pounds and is great for my home gym. I have the squeeze clamps and they work fine. Can't beat the value for the price.
Naga Sai Bharadwaj Vadlamannati
2025-08-10 09:58:55
This is an awesome barbell I've liked after returning two other small ones.I've loaded this sucker up with heavy loads for my bench and squats and it didn't flinch at all.Like the durability and strength of the barbell.Has almost 14' of sleeve length on each side of the barbell, which is perfectly good for fitting any plates obviously but I should mention the adjustable dumbells.I hang my Powerblock Pro series dumbells to the sleeves. And it leaves perfectly comfortable space towards outside and inside. So it won't slide and fall out and doesn't hit the cage due to dummbell measurements.Love this thing in a nutshellI'm giving a 4 for the very smooth sliding sleeves. Sleeves could be better in terms of having little bit of rough surface so that it holds the plates better.But still this is awesome
Michelle Stephens
2025-08-05 15:47:01
Very sturdy , durable, and great value for my money.
HelloImTheWanderer
2025-07-29 13:26:58
I ordered the wrong length. I have since reordered the proper length. The circumference is perfect though. My weights are older and the circumference isn’t olympic style, so I struggled finding the appropriate bar. They made the return easy, and the item arrived as expected, and I suspect it will be the same for the replacement I just ordered.The replacement fit as needed. :)
Lawson Stone
2025-07-27 16:34:27
Overall this bar is nice. It came appropriately packaged in a cardboard tube enclosed in a long cardboard carton. It looks fine. The inside-the-collars distance is 48" which makes it a close fit for my rack, but it does fit. The most concerning feature, though, is invisible until you try to use it. The 1" bar is a fraction too small for most 1" clamp collars. Even a 25 lb plate is heavy enough to defeat the clamp and slide off the end of the bar, which would be catastrophic during a lift with heavier weights. This is very serious: you cannot use most plate clamps on this bar. The only ones that work are the ones using a set-screw. Friction clamps, whether plastic or metal coil designs do not clamp tightly enough to secure the plates on the end of the bar. Fortunately, I have some of the old-fashioned set-screw clamps so I can use the bar. But the real problem is that I only discovered this by accident! I clamped a 25 lb plate on each end just to check the rack on my home gym equipment, and as I lifted the bar, the plate and clamp slid off the end! What if someone tried a really heavy lift? So BEWARE. The 1" bar is too skinny for most clamps.
J. Adams
2025-07-25 17:44:11
It took months for this to arrive--It showed in stock when I ordered it, but I guess in the surge to buy home fitness equipment, I missed out. Fast forward three months and I'm very happy with it. Solid, sturdy construction, the packaging was easy to open but kept it safe. I like the 1" bars because all my plates are 1" but they always feel flimsy, or stay held together with little retaining clips/pins, and that scares the crud out of me when I get near the max rated weight for the bar. This one is solid construction and well worth the investment.
Justine
2025-07-04 18:58:10
Great product, very sturdy, and everything described is true
Raffaele
2025-07-03 12:18:47
Bilanciere comodo.
Cristian
2025-06-28 15:02:17
Does the job, good quality
Matlicious
2025-06-20 17:51:18
Gym maison. 1 pouce de diam. Coute moins cher qu'une 2 po.olympique et seulement besoin dacheter en plus des fatgrip bleu à 20$ pour avoir une prise plus grosse. La barre est arrivėe en parfait etat. Seulement, elle est glissante mais cela senleve à la longue.
Joel Perreault
2025-06-09 19:12:54
Pour plaque 1"
J.R.
2025-06-07 18:48:41
The media could not be loaded.
Chase
2025-05-29 15:37:57
Contrary to a lot of what I'm seeing regarding the shipping/delivery of the bar, mine was delivered about 3-4 days after I ordered it. Also, to address any dimensional questions... I got the 6 ft long, 1 inch in diameter bar and the distance between collars is about 49 inches, so it WILL fit comfortably on any standard-sized bench/squat rack. This is an excellent barbell- very durable and robust. Given the considerably low price, I was a little unsure of how the quality would be prior to purchasing. I can safely say that I have put around 200 lbs on the bar without it bending and all weights stayed secure (with clips of course). I would agree with those that say it can handle over 300 lbs, easily. If shipping goes as it did with mine, you will not be disappointed with this barbell!
Customer
2025-05-23 12:03:03
My son gave me a weight set with a 2 piece bar. I got to the max amount I could lift with the bar. At 68, this is my first time lifting. (Started 6 months ago.) I was two pounds short of pressing my weight, (133) so I wanted to get more weights, because there was no room on the 5 foot bar. So, I need a new barbell first. This bar is awesome, weighs 15 pounds and is great for my home gym. I have the squeeze clamps and they work fine. Can't beat the value for the price.
Naga Sai Bharadwaj Vadlamannati
2025-05-13 17:10:38
This is an awesome barbell I've liked after returning two other small ones.I've loaded this sucker up with heavy loads for my bench and squats and it didn't flinch at all.Like the durability and strength of the barbell.Has almost 14' of sleeve length on each side of the barbell, which is perfectly good for fitting any plates obviously but I should mention the adjustable dumbells.I hang my Powerblock Pro series dumbells to the sleeves. And it leaves perfectly comfortable space towards outside and inside. So it won't slide and fall out and doesn't hit the cage due to dummbell measurements.Love this thing in a nutshellI'm giving a 4 for the very smooth sliding sleeves. Sleeves could be better in terms of having little bit of rough surface so that it holds the plates better.But still this is awesome
Michelle Stephens
2025-05-03 17:24:01
Very sturdy , durable, and great value for my money.
HelloImTheWanderer
2025-04-26 13:46:43
I ordered the wrong length. I have since reordered the proper length. The circumference is perfect though. My weights are older and the circumference isn’t olympic style, so I struggled finding the appropriate bar. They made the return easy, and the item arrived as expected, and I suspect it will be the same for the replacement I just ordered.The replacement fit as needed. :)
Lawson Stone
2025-04-11 12:40:12
Overall this bar is nice. It came appropriately packaged in a cardboard tube enclosed in a long cardboard carton. It looks fine. The inside-the-collars distance is 48" which makes it a close fit for my rack, but it does fit. The most concerning feature, though, is invisible until you try to use it. The 1" bar is a fraction too small for most 1" clamp collars. Even a 25 lb plate is heavy enough to defeat the clamp and slide off the end of the bar, which would be catastrophic during a lift with heavier weights. This is very serious: you cannot use most plate clamps on this bar. The only ones that work are the ones using a set-screw. Friction clamps, whether plastic or metal coil designs do not clamp tightly enough to secure the plates on the end of the bar. Fortunately, I have some of the old-fashioned set-screw clamps so I can use the bar. But the real problem is that I only discovered this by accident! I clamped a 25 lb plate on each end just to check the rack on my home gym equipment, and as I lifted the bar, the plate and clamp slid off the end! What if someone tried a really heavy lift? So BEWARE. The 1" bar is too skinny for most clamps.
J. Adams
2025-04-07 15:56:05
It took months for this to arrive--It showed in stock when I ordered it, but I guess in the surge to buy home fitness equipment, I missed out. Fast forward three months and I'm very happy with it. Solid, sturdy construction, the packaging was easy to open but kept it safe. I like the 1" bars because all my plates are 1" but they always feel flimsy, or stay held together with little retaining clips/pins, and that scares the crud out of me when I get near the max rated weight for the bar. This one is solid construction and well worth the investment.
Justine
2025-03-28 13:39:06
Great product, very sturdy, and everything described is true
Raffaele
2025-02-06 17:29:40
Bilanciere comodo.
Cristian
2025-01-30 18:00:00
Does the job, good quality
Matlicious
2025-01-24 15:21:03
Gym maison. 1 pouce de diam. Coute moins cher qu'une 2 po.olympique et seulement besoin dacheter en plus des fatgrip bleu à 20$ pour avoir une prise plus grosse. La barre est arrivėe en parfait etat. Seulement, elle est glissante mais cela senleve à la longue.
Joel Perreault
2025-01-20 18:26:28
Pour plaque 1"
Recommended Products
$38.00
$ 18 .99 $18.99