Your cart is empty.
Your cart is empty.EPI ProBucker pickups set with controls wiring harness The EPI ProBucker pickups are currently offered in various models including the Les Paul Standard PlusTop PRO, Les Paul Ultra PRO, Les Paul Standard Quilt Top PRO, Les Paul Custom PRO, Les Paul Ultra-III, and other models coming soon. These pickups are an inspired version of GIB's BurstBucker, featuring unevenly wound coils and Alnico-II magnets that replicate that "Patent Applied for" airy tone. You'll love the way they sound! ProBuckers feature: 18% Nickel Silver unit bases and covers: This is the same alloy used by GIB. The use of Nickel Silver reduces the occurrence of eddy currents due to low conductivity and provides a more transparent and crisp output. Bobbins manufactured to GIB specifications and dimensions: The size and shape of bobbins has great impact on tonal response. The bobbins used on these pickups duplicate the size and shape of the gold standard in the industry, GIB humbuckers. Elektrisola magnet wire: The same wire used by Gibson. Single build (thickness of coating on wire) high quality magnet wire manufactured to NEMA (National Electrical Manufacturers Association) standards. Pole screws and slugs: Manufactured to Gibson specifications, using the same metal alloys. Also: ProBucker pickups feature Sand cast Alnico II magnets, high quality 4 conductor lead wire and are Vacuum Wax potted to eliminate microphonics.
astepabove
2025-09-06 13:37:03
I really don't have a negative remark ,only thing i got confused with was trebble and rhythm knobs were backwards and had to redue them .other than that fairly easy,love the the sound was replacing them with a cheaper set from a guitar my brother gaveme.(bossman)Sounds and play great very pleased!Very good quality for the priceLove the quick disconnects instead of a bunch of wires to solder
Forrest Jackson
2025-08-13 12:45:33
I installed these into a hollow body Jay Turser (LP copy) and it was a very difficult installation. It would be VERY easy to install on any other guitar, however, so don't let my experienced difficulty dissuade you - I don't believe there could be a more PITA installation situation than on my axe, so carry on knowing you have it easy. Unless you have a hollow body - then breathe deeply and center yourself... Zen is coming for your ass.The arch of the pickup trim didn't match my profile so it was easier to use the old trims.I broke a solder joint with one last pot to install on the first go-round, so I had to pull it all out and resolder two wires and reinstall it all, again... but being such a pain to install on my guitar, I probably broke them with my abuse - I'll own that.A wiring diagram would have been helpful, tho.I had replaced one of the stock Jay Turser pickups with a Seymour Duncan a long time ago, which sounded good (much better than the stock crap in there), but these both sound great through my twin and my old champ... the push pots don't add anything but noise, but the straight up tone I can get from the volume/tone knobs on either pickup makes me pretty happy.I am very glad I did this, even though my guitar made me suffer mightily for it... it was a definite upgrade in sound.
CL-Oregon
2025-08-05 12:25:11
Only reason I gave this kit 4 stars is a lack of instructions. There are no instructions, so you have to guess what goes where but otherwise have connectors prewired made installation very easy. It was the reason I purchased this kit. There are other kits that are less expensive, I had purchased one previously and attempted installation. However with all the cutting and required soldering in a tight space it was just difficult to do. Using the connectors provided in this kit solved all that. Only soldering was the bridge ground wire.
sher
2025-08-03 17:55:48
Loving the sound of these pickups. Its very easy to install. Only thing I had to do was solder the wires off the switch to be able to feed through the holes.
R.D.
2025-07-24 16:39:11
Big sound for the money. Neck pickup is a little muddy initially but after adjusting pickup height and EQ settings (pulling back on low ends a little), these sound fantastic and even (not muddy and not too bright). I’m amazed that these are really good quality at this price. And to have the whole kit assembled already??? Amazing. I installed into a ‘78-9 Hondo II LP style guitar. I also soldered the ground from the bridge onto the back of one of the tone pots. It was easy to do (my first time soldering anything). They are a bit fragile I guess, as one wire broke off a solder joint from the volume pot as I was moving wires around, but not a big deal to solder back on.
josh
2025-07-16 14:43:26
Super easy install, look good, and sound pretty good too.
Zarathustra Sez
2025-07-03 15:12:43
The media could not be loaded.
Michael T.
2025-05-12 09:23:36
These are great for the money. They sound good. However, I doubt they're really epis at this price. But for the price for the package they're great. They are really wax-potted if your wondering. They're clean sounding and I have no issues with the pots being crackely or anything. Be aware tho you didn't get real independent volume control for each pickup unless you wanna move a few wires. The coil tapping works great and the switches feel nice and smooth. So again for $75 you're getting a bargain on a whole package ready to install. They're good quality, I doubt they're authentic tho. I could be wrong, but that doesn't matter to me if they work
Judah
2025-05-11 13:29:16
Fairly straight forward to install. Installed on a 70’s vibra les paul copy. Makes the guitar sound a lot better. I did have to use the original pickup frame/ covers as the ones these probuckers come with are for a epiphone/ gibson concave top which didn’t fit the contour of this old vibra LP. I also had to trim a little bit out of the back of the selector switch hole so the nut could grab the threads with the washer. Again its an upgrade to an old guitar. Other than that sounds great for a budget reborn guitar.
trevor
2025-04-26 11:20:53
Excellent sounding pickups at a great price. All the pre wired electronics are a major added value if you hate soldering. Putting in a scratch build sg project.
Dan
2025-03-11 16:20:38
These are an absolute bargain! Genuine Epiphone Probuckers and they sound awesome. They come from the USA and arrive fast, they are pre-wired and ready to install. The pots are the old style Korean pots not cts ones but the pickups are the same as the ones in the epiphone pro guitars. These are the perfect budget upgrade for the standard epiphone pickups and they sound ten times better and give you the split coil option which also sounds awesome.
Marc-André Roby
2025-01-31 10:17:29
un son vintage des note aigue et grave comme on veux
Jason smith
2025-01-26 11:32:38
Upgraded some no names ones and these fit great and sound better
Recommended Products
$23.99
$ 11 .99 $11.99
$32.12
$ 14 .99 $14.99