Your cart is empty.
Your cart is empty.Product Description
Full Extension Ball Bearing Drawer Slides-Sulawskys
10 inch drawer slides 6 pair(12pcs),And match with 12pcs screws for each pair..
Sulawskys drawer slides are available in 10inch, 12inch,14inch,16inch,18inch,20inch,22inch.
Various choices for drawers in your kitchen,bathroom,bedroom,office with different depth.
Drawer slides 10"-6pair (12pcs)
3 Fold Drawer Slides 10inch
3-setions fold is convenient to fully open the drawer for easy access. Ball bearing design ensures smooth and silent drawer slides.
Drawer Slides-Sulawskys
Side mounted Steel ball-bearing action.100 LB capacity.
Can be applied to: cabinet drawers, wardrobe drawers, decorative cabinet drawers,various home improvement drawers，etc.
How to Choose the Size?
To determine which size of slides are good for your drawer, please measure the length of the drawer without the frame board.
And if the length is not even, please choose 1 inch shorter. The length of slides can't be longer than the cabinet case depth.
KEY FEATURES-Full Extension & Ball Bearing Design
Nylon Rubber
Equipped Nylon Rubber,reduced noise when the drawer is closed,stable performance.
Solid Ball Bearing
Built-in double rows of solid steel balls make the drawer smooth and silent.
Three-point screw hole fixing
Seamless cutting technology, three-point screw hole, strong fixing and bonding force.
Heavy Duty Load capacity
Can bear the weight of 100LB,will not bend and deform.No rust, no deformation.
Installation Precautions
1.Ensure the size of selected slides ≤ the depth of drawer;
2.Reserve 1/2 inch of clearance for mounting on both sides;
3.The two glides must be mounted in parallel,or will damage the glides;
4.Mounting screws are included.
Skytang
2025-08-25 15:00:49
quality material for low price. replaced all the hardware on our chest of drawers and these were spot on. we ended up using the screws from our last hardware because they were short enough (the ones it came with were a touch too long and poked through the wooden drawer). these close well and the bumpers feel solid on them. we replaced our 11.5 inch with these 12" slides and they worked just fine. love the quality and 6 slides for 30 bucks is a great deal in my mind.
Mike in Tucson
2025-07-24 11:56:33
Very sturdy, not Chinese flimsy, was unfortunate I had to buy pack of 6 as I only needed 4 .
icFreakazoid
2025-07-07 13:22:16
Damn, the price per slide rail is amazing. I've used these on several drawers that receive quite a bit of use and abuse. They're still holding up after a couple years (even with a toddler hanging on the drawer).
duwan d.
2025-07-02 11:07:46
works just fine
J. Hanlon
2025-04-18 12:42:55
I bought these for a workshop project and for that purpose they are okay. These are definitely not high quality like a Blum, or similar, but I knew that going in. The bearings are just stamped metal and I doubt they would hold up under daily use. But for my project they are fine and the price was good. As long as you are expecting a finely built high quality slide you'll be pleased.
Martin D.
2025-03-25 17:43:07
Not soft-closing, but they do have a soft detent when fully closed. Smooth and quiet.
Jeff T.
2025-01-18 15:57:31
These are decent quality, and most importantly they are consistent. All bearings were in good order, and screws (although a little long) were included. Perfect for refurbing a dresser.I will say that they claim a half inch thick, but my micrometer says they are 13mm. If you are precision building, keep that in mind.Do yourself a favor, and use a lithium grease on the bearings while you have them apart for install. The factory 'lube' is a bit tacky, so a white lithium or cerulean grease really makes a world of difference on these. I'm sure you have some in your shop already. ;-)
HeadhunterMike
2024-12-26 11:07:09
Overall I am very happy with these slides, I used them for slide out drawers on my workbench. Unfortunately, as I was putting one of the drawers in, it was slightly misaligned and as I tried to close the drawer, I bent one of the thin metal parts that held a section of ball bearings. I removed the drawer, bent the thin metal ball bearing holder back into place (minus the ball bearings) and the slide works fine. it is rated for about 100# but not sure I would put that much weight on them.
Recommended Products