Your cart is empty.
Your cart is empty.Product Description
2091 P-100 Particulate Filter Specification
- Material: cotton, plastic，Non-woven fabric
- Size:The diameter of the filter is 4.33inches/109.98mm .Interface diameter: 34.8mm / 1.37 inches
2091 P100 Filter Cotton
How often should these be replaced？
- 40 hours of protection is a reasonable expectation for every respirator filter.
- When the filter cotton is dirty, damaged, and the breathing resistance increases significantly, please replace the filter cotton.
- The product cannot produce oxygen, please do not use it when the oxygen concentration is lower than 19.5%.
INSTALLATION
Installation Step 1
Take out respirator mask and particulate filter.
Installation Step 2
Align the slots of the mask and particulate filter.
Installation Step 3
Rotate in the direction of the arrow.
Installation Step 4
Rotate to the position shown in the figure
Efficient filtration
1. This 2091 particulate filter consists of non-woven fabric, meltblown fabric and hot air cotton, 14 layers of filter cotton, which can effectively filter oil and non-oil based particulate contaminants.
2. The particulate filter filters all types of particulate matter, including: welding fumes, metal fumes, asbestos dust, radioactive particulate matter (such as uranium and plutonium), glass fibers, etc.
3. Use on multiple occasions
Painting
Welding
Metal Cutting
Sanding work
Renovation work
Decorating Carpentry
Suitable for production in cement factories, ceramics factories, shipyards, soldering, railway,metal smelting,interior renovation,stone processing,graffiti painting, wall art, powder processing.
Have a nice life!
Mark C
2025-09-04 15:29:08
These filters fit my mask perfectly! It was nice being able to order a pack of 10 so I don't need to reorder for a while. They are of very good quality and worked great for my needs.
Marian-s
2025-07-27 14:35:50
I peel a lot of paint and old adhesive and I feel like I haven’t lost many brain cells. Must be doing the job. Fits well on my 3m mask.
Customer
2025-06-06 14:16:32
Having problems dealing with sawdust in my carpentry workspace I thought it was necessary to improve my respirator to the 3M headgear that uses these filters. Within seconds of putting the respirator on it was obvious that the masks I had been using were too porous. The filters are lightweight and snap cleanly into the respirator. I ultimately discovered that, while the filters are large, they are light weight. The only con of the filters are that although they aren't truly single use, they they also aren't washable.
GK
2025-06-04 13:15:06
Can def tell it’s fake but it was cheap
Troy
2025-04-23 18:27:15
This have worked really well. I have used them for cutting wood, tearing down rock walls, mowing the yard and doing lapidary work. It definitely filters out the dust from all of this. You can tell that it works because you see the fine dust collected on the outside of the filter. I would recommend these.
Private
2025-04-21 10:10:47
Awesome
charles stevens
2025-03-19 10:43:48
Over the past few years, I have been working with reclaimed wood. By not using the proper mass filters along while using a sawdust collector, I have gotten sick a few times throughout the years. I have come to the conclusion that the old wood had mold spores on it which I was inhaling, as a result, made me sick. I did my research for the proper filters for woodworking in my workshop and I haven't gotten sick since using these. I personally recommend these filters.
Bryce P.
2025-02-18 21:49:07
I just use these for sawdust. They do a good job and are inexpensive so I can replace them regularly. Working in cold and damp conditions, I like to replace cartridges often. These are a good price so I didn't feel bad throwing the old ones out. Have bought these multiple times and didn't notice a difference between these and 3M.
Recommended Products