Your cart is empty.
Your cart is empty. Features
High precision and high resolution.
Three measurement mode for selection（Real time、Peak、First peak).
N(Newton),Kg (Kilogram) , Lb (Pound) and Oz(Ounce) four units for selection and conversion.
Setting function of gravity acceleration----User can input at your option the accurate value of gravity acceleration at the using place so as to make the testing and unit conversion be more accurate.
Upper and lower limits can be set for statistic analysis. The buzzer will alarm if exceeding the limits.
Minimum force value shielding function: the data within the set minimum range can be shielded.
Automatic shutdown function: The automatic shutdown time can be set, and the automatic shutdown can achieve a point saving effect when there is no operation for a long time.
Automatic backlight, buzzer alarm function.
Specifications
Maximum load value：100N；10kg；22Lb
Load division value：0.1N；0.01kg；0.01Lb
Sensor structure：Inner sensor
Accuracy：±1％
Power： 2 AAA batteries 1.5V（not include）
Working temperature：5℃～35℃
Transport temperature：-10℃～60℃
Relative humidity：15％～80％RH
Working conditions：No vibration source around and no corrosive environment.
Dimensions：124*60*31(mm)
Net weight：~0.4Kg
Package
1 x Digital push-pull force gauge 1 x Instructions 1 x Certificate of conformity and warranty card 6 x Fixture head 4 x Socket head cap screws M4*8 4 x Socket head cap screws M4*10 8 x Spring pad Φ4 2 x Nuts M6
Mike Chibnik
2025-07-04 14:13:59
I used to use a digital fish scale for force measurements but this unit is much easy to use and gives accurate readings in values of force rather than in weight, so conversion of values is unnecessary. Also, the peak reading modes is very handy.
Prasad
2025-04-27 14:11:15
This instrument is handy for measuring force. The readings are fairly linear and accurate for higher loads however, for smaller loads this tends to be less linear and a bit inaccurate. For this price, it is a good deal. It can also be indirectly used for measuring torque etc.
Wall•E
2025-01-18 14:09:41
The meter functions as it supposed to and it comes with a nice protective case for it in the accessories. My main issue comes from the fact that the listing wasn’t really clear about which scale I was going for. I wanted the smaller precision 50 N device and ended up getting the 500 N one and it’s not accurate at all for smaller forces. If you’re dealing with a precision tasks like computers or knives, this will not suffice. It’s great for things like a automotive application.Clearly the mistake was mine but I thought I did everything to make sure I was getting the more precise unit at the 50 Newton limit. But I end up with the 500 N limit which will not work at all for my tasks. I would ask that the vendor makes the distinction much more clear on the listing. Or list the units separately.The build quality seems very good and it definitely seems to provide accurate measurements at a high force range. It will allow you to do push and pull which is handy. And unlike many small devices you buy this actually came with a very good case to protect it.I would note that it comes with a variety of useful tips and accessories. Various tips and hooks and an extension rod that attached to the end of the probe. The unit itself really is solidly built and it comes with a calibration card. One thing I am thinking is that because it’s digital it is trivial to allow you to switch between SI and imperial units. this unit allows you to select between pounds and ounces and kilograms. Not all devices do this so this is a mark in his favor. I guess because it is the 500 Newton model it doesn’t do CGS.
Recommended Products
