Your cart is empty.
Your cart is empty.Product Description
How to Use Black Dent Lifter&Bridge Dent Puller?
- Clear the surface with a wet cloth.
- Insert the glue stick into the glue gun, heat for about 3-6 minutes and apply the glue.
- After the glue has cooled for 1-2 minutes, use the dent lifter and adjust its height to repair dents.
- Afterwards, use the bridge dent puller to align, then tighten the knob slowly with proper power until the surface of the dent is flatted or sightly bulged (Repeat the above steps until the dent pop up)
- Spray with 95% alcohol and remove with a plastic shovel.
How to Use T-Bar Dent Puller?
- Clear the surface with a wet cloth.
- Insert the glue stick into the glue gun, heat for about 3-6 minutes and apply the glue.
- Wait for 2-3 minutes, when the glue cools down and has residual temperature, use the spring force to pull the t- bar puller back
- Repeat the above steps until the dent pop up
- Spray 95% alcohol on remaining glue and scrape it off with a shovel after 1-2 minutes.
Ty
September 3, 2025
Suction cups are kinda junk, glue and sliding hammer is amazing, other accessories are okay***use some acetone with this if you are using the hot glue, it makes getting it off so much easierIf you go into this with mild expectations, I think you’ll be pleasantly surprised with this kit. I recommend watching a YouTube video or two and be mindful of what you’re trying to fix.This kit isn’t a miracle worker, but it’ll definitely make certain kinds of dents look way better, especially from further away.The pictures might not do it justice, but I don’t notice the dent when walking up to my car anymore. Saved me an $800 repair, so I’m satisfied
Z
July 25, 2025
Quite a good value for the $. Some items were not strong enough, but that was my experience.Would buy again and definitely helps remove some of the minor dents.
SHAWN DEAN MCDONALD
July 24, 2025
Never work for me I think may dents are two rinckled
Melissa Beck
July 13, 2025
After a hail storm, small to med size dents on car.Glue doesn't hold, tools not strong enoughto pop the dents up, not even the smallest dents, and afterwards trying to remove the glue from the car will leave spots as it pulls up the clear coat too, so now I have a nice little dull spot dents on car.Not work the time or money
CBeh
May 13, 2025
Came with a good assortment to do the job if needed. Glue sticks that came with the product does not stick well to the vehicle's body, therefore makes it not fully usable. Have to try numerous time and greater quality of glue to finally make it stick enough to do the job. Hard to stick on to newer vehicles that still have new gloss finish on them, making it impossible for glue to stick no matter how much. New a better glue sticks to make this a great product.
Excelentes
May 9, 2025
Muchas gracias
Customer
April 20, 2025
So you get a lot for the money but as you can see from the picture the one piece is actually plastic so it bent crazy easy! I had to end up making my own rig with a piece of Steel. I was trying to pull out some dents in a pontoon boat. The metal is less than an eighth of an inch thick but it was too much for this tool. Simply needed a bigger surface to glue on to the metal. I imagine this could work for thinner metal but I actually thought car metal was just as thick or even thicker. The glue gun is the cheapest of the cheap but it's still heated up more or less the glue be sure if you buy this when you use the glue that it is completely hot and liquid and you will get your best Bond. This kit did not work for me
Bill
March 19, 2025
Really amazing kit comes with all sorts of tools you could need. Very easy to use and understand.
Pam Petch
February 14, 2025
This did not work in the least!! Very disappointed.
Recommended Products