Your cart is empty.
Your cart is empty.You can buy bottles from your local hardware store that you cut the tip off a plastic tub that just dumps the liquid out or you can buy a pharmaceutical grade product for a precision application.
Tucson
2025-08-30 14:13:43
Not much to say but they are inexpensive and work with the solvents and oils I use. I've bought them a few times. Accidental over saturating is eliminated. Its easy to apply teeny amounts oil exactly where you want it. A lot of mess is gone. The red tips can be easy to lose (I haven't yet) and the needle tip may quit being secure. They are not made to last forever. Be practical. These are great to have and hard to find if your an ordinary layman.
Mike303
2025-06-05 11:46:05
I use these for gun oil and CLP. They are perfect for my needs, allowing me to apply cleaner and gun oil in small areas, and as needed. I have not had any issues with leaking or spilling, and before adding to my gear bag, I tested this throughly.These are great little bottles. Highly recommended.UPDATE 4/25/20These are holding up well, no issues at all so far. The lids also fit stock Slip 2000 and Otis oil and lube bottles, which is incredibly convenient*******************************I rely heavily on reviews when I make purchases so I put some time into reviewing everything I buy on Amazon for personal or business use so I can help other people considering that item. If you found my review helpful, please consider hitting the "helpful" button below when it asks if the review is helpful!
rdalek
2025-04-29 12:15:46
I bought a set of these for gun cleaning solvents and oils. I filled them the other day with some oils and solvents and put them in my kit. I have a couple liquids that are pretty tough. They can be used as solvents in car/truck engines as well. So far, been several days now, none of the ones I filled have leaked a drop.The needle is very nice. Even one of my thicker oils flows well enough. Tip, before turning the bottle on its side to lube, squeeze the bottle a little bit. If you apply lube in tiny amounts, when you done and turn the bottle back upright and let the bottle expand back out, it will pull all the oil in the needle back into the bottle. This comes in handy for me since my cleaning kit is stored in a cool place and when I bring it into a warmer place, it expands and will dribble oil that is trapped in the needle. Sometimes even the heat from fingers can cause this. I've used this trick on all types of oilers.For those with kits that are somewhat small. Here is some info on sizes. Laying flat, the bottle is 1-1/4" tall. In my kit, it lays flat. Standing up, including the needle, it is about 5-1/4" tall. These fit in a Flambeu 5003ZM storage box just fine.I might add, when empty, the needles can be stored inside the bottle and the cap put on. Then when you ready to use it again, just put the needle back on and put in whatever liquid you use. You can also buy different needles if you need longer or shorter. Also, the cap feels to tighten up pretty early. Make sure you screw it all the way down.I use Lucas/Slip2000 oils. A little goes a long ways. I also use Zmax as one of my cleaners. These bottles hold enough to clean and lube a lot of guns before refilling. If your kit is small or otherwise limited in space, you might want to buy the smaller version of this bottle.
Monkey Nut
2025-04-16 11:58:45
Works great, but will not hold up to strong solvents. Oils work fine in these but I have had 2 needles fall off when using hoppes #9 in these. It seems like it is desolving the adhesive that keeps the needle in place.Not a show stopper though, I just won't use these for anything but oils. They work great otherwise. I have ballistol, mobile 1, sewing machine oil, marvel's and Lucas oil in these without issue. I suppose kerosene is just a bridge too far.
DGM
2025-04-15 11:56:07
These bottles are excellent for the reason that I used them. I fill these bottles with gun oil and they really make the task very easy to complete. They help use precise amount and they don't make a mess. I gave some of the bottles to my son for his paint ball gun and they really help him oil the parts and don't make a mess.
Amy
2025-04-12 16:30:10
Perfect for standard frosting tip coupler attachments. Turns out the top of the little bottles fits the standard frosting coupler attachments. I purchased these for whenever I’m using different colored frosting in such small amounts to make things easier for decorating treats I make. This has made decorating treats easier than using several frosting bags. Just be careful DO NOT screw the cap on 100% all the way down or else the frosting tip likely squeezes out of the coupler attachment end as I learned from experience.
Customer
2025-02-16 18:23:14
If you're a hobbyist, etc. and need to use oil in small, controlled amounts, these are perfect!I gave several bottles to friends.
dhbailey
2025-02-06 13:42:37
I repair musical instruments and I need to be able to get liquid soldering flux into very precise locations and these needle oilers do that very nicely. I've used others in the past where the needle part was so thin that when it got near the heat of my small soldering torch the needle would deform -- these are made of much sturdier metal and they do NOT deform when near heat. I highly recommend these for anybody who needs to get any liquid, whether oil or soldering flux or water or some other liquid into a very precise location.
Recommended Products
$39.99
$ 18 .99 $18.99