Your cart is empty.
Your cart is empty.Product Description
Jesus Sanchez
2025-07-12 16:30:42
It's working and so far so good.
Dontknowanything
2025-06-18 15:28:48
once i found a jack i could use for this this piston can lift a car easily although you need to make it really snug before you start it up cause it only has like 8inchs of movement since its a very compact piston.
Kyle Wilfong
2025-05-20 10:17:15
Check the fitting to make sure it’s compatible
Kindle Customer
2025-04-19 16:24:19
Once I got this finally connected properly, it worked well. I didn't have 10T to test it against, but it lifted 2T fine. I doubt I'll ever need to use the full 10T.This piece doesn't come with a CP-180, and not all are made equally. I ordered a CP-180 separately. The hydraulic fitting was completely different, so I then had to go and order a hydraulic fitting set.I will say that the fitting was attached *very* tightly on this unit. The jack is so small that it is hard to hold with your hand. I ended up putting the fitting in a vise and then using a rubber dead blow mallet to rotate the jack around. It took some doing.
DCI
2025-03-29 17:38:18
The unit I received has an auto return spring, had to get a different fitting for it to work with my HF porta-power unit. Used it to level up a small building with limited space under it. Well built solid unit, Will find many other uses.
Ram
2025-01-29 15:01:43
Justo lo que esperaba, ni mas ni menos, envÃo rápido, bien empaquetado.
David S.
2025-01-20 14:32:43
I recently acquired the MMNZE 10T 2" Stroke Hydraulic Cylinder Jack for an upcoming project. After some initial testing, I'm quite impressed with its performance and quality.Key Features:10-Ton Capacity: The cylinder jack has a 10-ton lifting capacity, which should be more than adequate for most heavy-duty applications.50mm/2" Stroke: The travel distance for the jack is as advertised, meeting my expectations for the range of motion.Single Acting, Auto-Retract: The jack is designed to retract automatically, simplifying operations and reducing manual labor.Leak-Free: One of the main concerns with hydraulic systems is leakage, but I found this cylinder jack to be completely leak-free during my initial tests.Versatility: This hydraulic cylinder jack is suitable for a variety of applications, including machinery, shipbuilding, bridge construction, and more.Overall, the MMNZE 10T 50mm/2" Stroke Hydraulic Cylinder Jack appears to be a reliable and well-constructed piece of equipment. It met all my expectations in preliminary tests. I'm planning to incorporate it into a special project in the future, and I will update this review if I encounter any issues after long-term use. As of now, I highly recommend it for anyone in need of a powerful and reliable hydraulic jack.
WRH
2024-12-09 18:56:18
Exactly as described and pictured.This hydraulic jack has already gotten it's first test.We needed to add some support to a part of the floor where a 1600lb (empty) vault sits. It wasn't sagging but for safety's sake we decided to reinforce the area it was sitting on. Filled up it's about 2600lbs.After pouring a concrete pad on the ground under it we built a support box out of 6"x6" lumber. 9 vertical pieces and 10 horizontal pieces. Turns out we made it about 3/32 to tall and couldn't get it between the concrete pad and the floor.This is where this MMNZE jack come into play.Combined with the recommended CP-180 hydraulic pump, we put a piece of 6"x6" lumber on the jack and just off to the side of where the support beams/frame was going and lifted the floor just enough to slide it in place and then let the jack down where everything came together perfectly.Could we have maybe hauled in a gigantic 5 ton floor jack and done. this? Maybe.I much prefer using something smaller and lighter - not to mention ..... a lot stronger.Bottom line? We got the job done and using the Porta Power Ram made it easy.I see a lot of value in a small 10 ton jack like this and I highly recommend following the manufacturer's directions by using the CP-180 with it.I see this as a good deal and a very good value. Glad I got it.
Recommended Products
$126.02
$ 59 .99 $59.99