Your cart is empty.
Your cart is empty. Our products are fine made with nice materials and good workmanship, strict quality control, guarantee in after service.
The solenoid valve is is mainly used in water dispensers, washing machines, dishwashers, etc. The working mode is N/C Normally Closed, it will open the valve when the power is on
More details about the solenoid valve:
Connect to G1/2 inch male thread
Working voltage: DC12V
Water pressure: 0.02-0.8Mpa
Liquid temperature: 0-100℃
Size: 71*34*59mm (length * width * height)
Package:
1 x 1/2" DC 12V solenoid valve N/C
wexfordhunter
2025-08-28 13:03:47
Perfect product for the job and a great value
jorge hernandez aguillon
2025-08-23 14:55:53
cerrada deja pasar el agua
Trae G.
2025-07-14 18:23:54
Great valve, used for automated watering system. It holds a constant 60psi without leaking when off. It has opened and closed with my timer without fail for 4 months now.
SWatty
2025-07-11 13:02:30
Example of "you get what you pay for"..Pass on this unless you want to redo in a short time.
Brent
2025-07-07 13:22:12
This is NOT 1/2" thread, making it very easy to cross-thread fittings. It must be a metric size near 1/2".
Damir
2025-05-10 17:22:32
It works perfect for what I needed it.
Alex Hernandez
2025-04-23 13:12:10
Excelente inversión,si es este articulo el necesitado en su proyecto.
Benjamin T. Brubaker
2025-03-18 11:08:11
Works as described. You will need 11 v to trigger the selonoid. I needed this for a gravity feed application. It is more designed for constant pressure like in house plumbing.
Ian McCabe
2025-02-16 09:13:52
Used this on a sensor tap system where the exsisting 12v solenoid had failed. Still working after being fitted months ago.
Calvin
2025-02-06 12:08:48
I wanted the valve to stop & start the flow in my aquarium in case of an overflow, It didn't seem to close tight the water still flows.
Klaudia Szewczyk
2025-01-08 14:30:33
Thank you
Eric
2025-01-03 10:57:34
Rather than actively opening and closing the valve when powered, this relies on water pressure to open when powered and likely a spring of some kind to close it when unpowered.In my case this meant that it constrained flow when it was supposed to be open, and then failed to completely close, leaking significantly.Don't buy
Bill G
2024-12-06 13:57:06
Intended use was to empty a water tank but the extremely slow flow rate prevented this. With a pressure of a few PSI the rate was about one drop a minute. Not good for 12 inch connections provided with this unit.
Recommended Products
