Your cart is empty.
Your cart is empty.Gail
2025-07-28 10:28:20
I’m using these to inject warmed ozonated olive oil into the cracks in my horse’s hooves. They are perfect. The cracks stopped in their tracks after the first treatment and I used the extras to give syringes to friends for the same thing.
J
2025-07-26 17:47:34
These dispensing needles seem well made and fit with no issues.
Albuquerque
2025-07-25 10:26:04
Fit my Leuer lock syringes perfectly. Currently using these for bearing oil dispensing. From 5w light oil to 90w gear oil, these are very good. Nice length for convenience and tight spots.
Heather Joy
2025-07-24 15:44:49
I know this is for non medical things but it is stainless steel. I have sterilized it and have used it for placing a numbing gel in someone's nose. It is a blunt end which is perfect. We normally use 18 g blunt ends to apply the medication but the gel was too thick on the last batch. the bigger catheters were great. I was able clean and sterilize it again. could probably be used for injecting marinates in meat or booze in watermelon. strong non flexible catheters.
J Osborne
2025-06-23 17:47:38
The only thing stopping me from giving these five stars is the lack of any scabbards (tip covers). Other than that they're great, nicely made. I'm using these on regular plastic bodies and they seal well, but you do have to be careful not to over tighten them...don't have any slip tip syringes but from the looks of these needles I bet they would seal just fine on those, too. Great for squirting or transferring thicker stuff like greases and glues, lotion, toothpaste, etc. The opening of most syringe tips is smaller than the opening in the larger three sizes of needles in these kits, so take that into account if you need to. The case could be better but it holds them snugly - bottom is soft polypropylene, top is hard clear crackable plastic. You may want to pop out the needles from the base with a gadget rather than prying up on the needle tips with your finger, but they are pretty stiff and none have bent yet. Good tips, good price for amazon, just needs some scabbards.
present_company_excluded
2025-06-21 15:53:02
I finally figured out the secret to filling small travel/trial-sized tubes and bottles: these. I’ve been using plastic syringes for a while with the disposable plastic luer lock blunt needles but they only come as wide as 14ga, very marginal for thicker liquids. With these stainless needles in 8,10, and 12ga virtually anything can be dispensed with almost no waste. Since these needles leave extra room at the aperture of the container, displaced air can come out as the product goes in, and there’s no need to pre-squeeze the container to expel air. I bought these because at 1-1/2†they are longer than the others I saw, so I was able to fill both 20 and 50ml tubes with toothpaste and face scrub respectively very easily, bottom to top. Afterward I just shot some soapy water through the syringe to clean. Very happy with this purchase, and the needles to appear to be fairly high quality stainless so I’m hoping they’ll last a long time. Recommended!
Lon Sorensen
2025-05-19 21:06:19
I work with 2-part epoxy and needed some way to get into small areas but still have a large enough needle to pick up a heavy liquid. This pack worked out well as I can choose a size appropriate for the job. They are sturdy, fit the Luer Lock syringes just fine, and are reusable many times if cleaned well.
Karen A.
2025-05-12 09:42:13
This is a well presented package that smacks of pro level tools. Well packaged. Fits luer lock amazingly tight. If you need something like this..this is the one to get. Even though I just got it yesterday I can already tell it will last for years. Cleanup is a bit of an unknown but the stainless seems really nice so no problems anticipated. Depends on what you use it for I suppose. I use it to layer mica onto carved soap. Glues and epoxies might be a bit of a "sticky" wicket.
Gail
2025-04-26 12:15:58
I’m using these to inject warmed ozonated olive oil into the cracks in my horse’s hooves. They are perfect. The cracks stopped in their tracks after the first treatment and I used the extras to give syringes to friends for the same thing.
J
2025-04-05 13:21:35
These dispensing needles seem well made and fit with no issues.
Albuquerque
2025-03-09 17:00:15
Fit my Leuer lock syringes perfectly. Currently using these for bearing oil dispensing. From 5w light oil to 90w gear oil, these are very good. Nice length for convenience and tight spots.
Heather Joy
2025-03-04 10:12:04
I know this is for non medical things but it is stainless steel. I have sterilized it and have used it for placing a numbing gel in someone's nose. It is a blunt end which is perfect. We normally use 18 g blunt ends to apply the medication but the gel was too thick on the last batch. the bigger catheters were great. I was able clean and sterilize it again. could probably be used for injecting marinates in meat or booze in watermelon. strong non flexible catheters.
J Osborne
2025-03-03 13:28:51
The only thing stopping me from giving these five stars is the lack of any scabbards (tip covers). Other than that they're great, nicely made. I'm using these on regular plastic bodies and they seal well, but you do have to be careful not to over tighten them...don't have any slip tip syringes but from the looks of these needles I bet they would seal just fine on those, too. Great for squirting or transferring thicker stuff like greases and glues, lotion, toothpaste, etc. The opening of most syringe tips is smaller than the opening in the larger three sizes of needles in these kits, so take that into account if you need to. The case could be better but it holds them snugly - bottom is soft polypropylene, top is hard clear crackable plastic. You may want to pop out the needles from the base with a gadget rather than prying up on the needle tips with your finger, but they are pretty stiff and none have bent yet. Good tips, good price for amazon, just needs some scabbards.
present_company_excluded
2025-03-01 14:23:56
I finally figured out the secret to filling small travel/trial-sized tubes and bottles: these. I’ve been using plastic syringes for a while with the disposable plastic luer lock blunt needles but they only come as wide as 14ga, very marginal for thicker liquids. With these stainless needles in 8,10, and 12ga virtually anything can be dispensed with almost no waste. Since these needles leave extra room at the aperture of the container, displaced air can come out as the product goes in, and there’s no need to pre-squeeze the container to expel air. I bought these because at 1-1/2†they are longer than the others I saw, so I was able to fill both 20 and 50ml tubes with toothpaste and face scrub respectively very easily, bottom to top. Afterward I just shot some soapy water through the syringe to clean. Very happy with this purchase, and the needles to appear to be fairly high quality stainless so I’m hoping they’ll last a long time. Recommended!
Lon Sorensen
2025-02-18 16:01:17
I work with 2-part epoxy and needed some way to get into small areas but still have a large enough needle to pick up a heavy liquid. This pack worked out well as I can choose a size appropriate for the job. They are sturdy, fit the Luer Lock syringes just fine, and are reusable many times if cleaned well.
Karen A.
2024-12-30 16:55:26
This is a well presented package that smacks of pro level tools. Well packaged. Fits luer lock amazingly tight. If you need something like this..this is the one to get. Even though I just got it yesterday I can already tell it will last for years. Cleanup is a bit of an unknown but the stainless seems really nice so no problems anticipated. Depends on what you use it for I suppose. I use it to layer mica onto carved soap. Glues and epoxies might be a bit of a "sticky" wicket.
Recommended Products
