Your cart is empty.
Your cart is empty.
This is the Aluminum 12mm to 17mm Wheel Hex Hub Conversion Adapter for 1/10 RC Car Upgrade Parts
FEATURES
Great if looking to put 1/8 scale 17mm hex wheels on your model
Adapters and wheel nuts are anodized Titanium in color
NOTE: These are not suitable for 2WD models using bearings instead of 12mm hex hubs.
Specification
Color: Dark Blue
Material: Aluminum Alloy
Total length: 24mm
Max axle diameter: 5mm
Axle thread: M4
Screw cap diameter: 12mm/0.47"(OD)
Weight: 48g
PACKAGE INCLUDE:
4x wheel adapters
4x 5mm bolt
4x Screw cap
kenmtb
2025-08-18 18:53:27
Easy to install and well made. No issues.Performance wise the wheel base looks a little wider but that is fine.I am concerned about increased leverage on bearings but so far no issues.I used blue locktite on threads and everything held nicely.I run the car on a relatively mild indoor clay track without problems. It is great to have a choice of tires now. The kit has much more initial turn-in compared to the useless stock tires. Having unlimited tire options is a great advantage. Durability is fine for the track I run. I have hit barrier walls and landed a bit hard without any damage to other components. Perhaps the longer leverage this mod puts on the arms and bearings is not significant. Overall I am very pleased.
Roberto Colon
2025-06-29 10:12:17
Perfect for my project
Kyle
2025-06-11 17:52:57
So far I have only once race night on these and they have help up great. Nothing has bent or wobbly. Just make sure to clean all threads and use lock tight to help prevent the screws from backing out. Great idea for anyone who wants to convert to buggy wheels and hit the track!
Charles Alton Hernandez
2025-05-17 12:28:31
These look great! BUT, I broke one during the installation...the shafts on the rustler must be a touch short....or I wa a too heavy handed.
Chase
2025-03-24 18:24:53
Great quality and perfect for changing 12mm to 17mm on the slash
Ej
2025-01-17 18:55:40
I'm absolutely buying another set, because 1/8 buggy wheels are amazing on rcs like the Rustler.REMEMBER TO USE LOCK TIGHT ON THE AXLE THREADS
Damien
2024-11-19 11:32:41
I don't always review products but wanted to say the seller (ACTruck) went above & beyond with their customer service. I lost a couple silver screws (my fault) on my 1st run so I purchased a 2nd set. They look great on my 2WD Rustler VXL (Challenger SRT8 body) and were easy to install - Be sure to put thread locker on/in the silver screws so they don't back out on you. I used blue Loctite 242 thread locker and they haven't came out since. I'd recommend these to anyone looking to run 1/8 wheels on 12mm hexes.
Masboost
2024-11-14 12:14:20
I've had other hex adapters that cover most if not all of the hex. This one barely gets in far enough to spin things. Seems like it may strip out the hex, we'll see. Also doesn't fit well inside a jconcepts renegade. Had to tighten on with pliers as even my thin walled socket didn't fit.
Recommended Products
