Your cart is empty.
Your cart is empty.
Easy Installation:
-Installation method 1:
1. Connect the wire to the 12V power supply. (Distinguish positive and negative).
2. Fix it with screws.
-Installation method 2:
Stick the bottom of the light board with self-adhesive and install it where you want.
Specifications:
Color : Daylight 6500K
Working Voltage : 12-85V DC
Material: ABS
Weight: 0.18lb (82g)
Light source : 72 pcs 5050 SMD LED beads
Light size : 25*6*1cm/9.8x2.36x0.39inch
Lumens : 1000LM
Watts : 10 Watts
NOTE:
*Only for 12-85V voltage(power adapter needed if for 110V home voltage)
*Adapter not included
Package:
1 x 12V LED Lights
1 x self-adhesive tape
1 x screw set
Charlene
2025-08-25 14:06:46
Easy to install, no issues. Great little light for over the stove in an RV
Angel rebollar
2025-08-15 21:17:29
Very bright works good i use it in my work truck
Mike Quandt
2025-07-16 18:15:19
Stays put and charge lasts a long time.
Michael Litwak
2025-06-14 15:13:58
The quality of the light is very pleasing. The built-in on-off switch works well. The lights themselves are super light.Each 12 volt light uses about 5 watts. I installed BOJACK inline fuse holders (for glass cartridge 5mm x 20mm fuses) on the positive lead, and loaded them with 600mA 250V fast-blow fuses from WiTonics.The stranded wire leads from these lights are very thin -- I do not know the gauge but I'd estimate 22 ga. I made my connections to my 16 gauge lines using Wago 221 splice connectors, which were fine and allow me to easily disconnect these lights if I ever decide to relocate them.I didn't try the adhesive strips. Instead I used the metal clips which mount with a single screw per clip. These clips are a bit too tight, but you can easily spread these clips out with your finger so they'll receive the light fixture.The plastic shield is clear, so you can see the individual LED dots when on. I saw no indication in the packaging or product description whether these LEDs produce any UV light, or whether the clear plastic shield can block UV. So I purchased a 6-pack of "Premium V Shape 16 inch LED strip channel with Anti UV Diffuser", scored-and-snapped the plastic diffusers to length, and taped them onto these lights with white duct tape. Now I can no longer see the individual LED dots through the diffuser. These diffusers reduce the light output a bit, and make the light a little less warm. But I'm no longer concerned about UV.Overall, a great pair of 12 volt lights. 4 of these lights are providing adequate lighting for a 16 ' x 20' shed interior using a total of 27 watts (I don't know why 1 light uses 5 watts and 4 lights use 27 - I'm just reporting what my Bluetti EB70S tells me).
Dave
2025-06-01 16:21:45
This was used in my canopy and now it lights up the entire back of the truck at night. Love it
Luke
2025-04-21 18:30:13
Bought these to setup some lighting for my work bench, and they work really well. They don't feel super high quality, but they're bright, the wiring was straightforward, and they're very bright. I bought a simple 12v DC power supply, and wired that to a toggle switch, then to the lights. Now I have a nice lighting setup wired to a toggle switch!
Mike F.
2025-04-08 10:27:55
Excellent for use in car accessory lighting. Nice and bright. I put it in the cargo area of my Subaru Crosstrek. Lit up the cargo area very nicely
randy l moss
2025-03-08 09:09:46
Every thing was okay until I connected to a 12 volt power supply off at a solar controller, they started to blink on and off an interruption of power of not a pure sine wave? Connected straight to the battery and worked fine, the wire leads could be heavier.
Dan
2025-02-18 19:17:43
ðŸ‘
Major singh
2025-01-02 11:23:19
It's very good product. I fix this light in my semi truck cab .very bright light and easy to install. Light with *****
Dave Van Her
2024-12-31 18:29:08
Any place that has 12volts (close to), this thing will light it up and then some.
Sylvian G
2024-12-11 12:12:38
J'utilise ces lampes dans mon camping car pour donner une lumière au dessus des tables de salon et salle à manger. Le choix de trois couleur (froid, tiède et chaud)et le variateur permettent un réglage parfait. Elles ont remplacé les deux lumière aux néons qui était un peu faiblardes et énergivores.
craigmpak
2024-11-18 17:04:08
love these lights ... very bright!
Recommended Products
