Your cart is empty.
Your cart is empty. Also applies to Monitoring Camera,Motor and Computer Projector
Q&A
Q:Why doesn’t my LED power supply work ? Or work for a period of time and then stop work and finally get back to work?
A:Because the LED power supply have over voltage, short circuit protection and overload automatic protection function. When the power reaches or exceeds the max power of the LED power supply, (For example, 150W lamp use 150 power supply) the LED power supply will stop working but it is not broken, only the overload automatic protection started.
Therefore, In general, we recommend using 80% power.
Q:Why does it take about 3s for the LED power supply to work when the switch was turned on?
A:The power delay is to protect the LED power supply, usually the delay time is about 3 seconds.If it does not have time-delay protection, it will make the light very bright when power-on, and dim, and then light up again, and that’s is what we called “strobe”. This is something is invisible with the naked eye. Strobe cannot protect the LED power supply.
Warnings:
-Don't open or modify the led power supply.
-Please leave children, kids far away from high voltage power source.
-Please use it under professional electrician's guides.
-Any abuse or improper use will void warranty.
Notice: Input cord:3.3FT Output cord length:7.5inch
Output Voltage: 12V DC
* Output Current, Full Load:12.5A
* Output Power: 150W
* Input Voltage: 100-260 Volts AC 50/60Hz
Output Cord: brown:the positive pole(+) ; blue:the negative pole(-)
Certification: CE &ROHS
Efficiency(Typ):>85%
Working Temperature:-13℉-+104℉
Working Humidity:20%-+95%Rh No Condensation
Waterproof grade:IP67
SIZE:6.61*2.67*0.78inch
NET. Weight:1.1LB
Package List:
1*LED Driver Low-voltage Transformer
JACK
2025-08-05 16:56:12
Not only works, it also looks professional. The aluminum casing is well constructed. An excellent heat sink
David M
2025-07-15 14:44:09
I purchased this for one of my undercabinet lighting projects and used it with a standard dimmer. It was easy to install, seem to be good quality and worked just as expected. These are so handy because you can use an in wall dimmer to control 12 V lighting.
Lucas belmore
2025-06-27 17:47:54
Works exactly how it should, I used this on a 12v heater and works great, size was not to big and for the price great
JDub
2025-06-03 15:37:46
This was used to supply 12v to 120w aquarium LEDs. Ran excessively hot which is likely because the system was overworked due to being underpowered. Died at 19 months, one month after warranty expired. I get that it's not that expensive, but I'm lucky it didn't fail catastrophically and cause a fire!
Garrett
2025-04-15 18:57:50
This power supply works fine for what I'm using it for, powering a subwoofer amp off a wall. However, its only outputting 11.8V, meaning you're not really getting the full 150W peak.
wilsjay
2025-04-10 12:32:20
Workes great, with zero issues. My inground pool had 2 Hayward 110v Astrolights with 500w bulbs. I have not been a fan of 110v in the water so when a bulb burned out I used the opportunity to convert to 12v. This transformer is much cheaper than the other ones for pools and is waterproof. I spliced this in between the light switch and the lights in the electrical conduit on my pump pad. I also replaced my pool light bulbs with 12v LED screw in bulbs. So far this works great.
Fernando M.
2025-02-10 10:01:19
Nos agradó mucho las dimensiones de la fuente de poder, ya que es ideal para la instalación de esta en nuestros espejos inteligentes con luz led; además el rango de voltaje AC es perfecto para lo que nosotros trabajamos.Gracias y felicidades por el producto
kjm
2024-12-26 17:04:58
This 150w 24vdc power supply is very thin compared to others on the market. I like the silver color as it hides better in my LED lighting projects. The other brand I used discontinued the silver color.
Recommended Products
$33.95
$ 14 .99 $14.99
$39.99
$ 18 .99 $18.99