Shopping Cart

Your cart is empty.

Your cart is empty.

18-Pack Durable Steel Dethatcher Tines for Replacement GreenWorks 27022 29272 2500600G 10 Amp 14' Corded Dethatcher

4.7 (10) Write Review
Free shipping on orders over $29.99

$9.99

$ 4 .99 $4.99

In Stock

About this item

  • ➤For Replacement GreenWorks Deathatcher Model 27022, Durable Steel Tines
  • ➤This is item is for Greenworks dethatcher units model 27022. Dethatchers are designed to remove thatch that builds up around the base of the grass and is common in lawns grown in overly acidic soil. Removing thatch build up will allow the lawn to better absorb nutrients and water and provide you with a stronger lawn growth
  • ➤[CHANGING THE TINES]: In order to change the tines, you'll need: - 8mm socket, - Phillips Screwdriver (Cordless Drill recommended), - Flat head screwdriver, - Small mallet or hammer. *be careful, the screws are not of the highest quality* if you need to change some of them, they are M5 X 22 or M5 X 25, 22 being the length under the head
  • ➤[Installation Procedure]: 1) Remove the screw(s). 2) Tap gently with a mallet to crack open the tine cartridge. 3) With a flathead screwdriver, pry open until you can see the pin, don't remove the tine cartridge out of the housing. 4) push out the pin and remove the tine. 5) put a new tine in place. 6) put the tine cartridge back in place, tap gently with a mallet
  • ➤Purchase Notes: Pleases make sure the part number of new replacement matches your original equipment before ordering. If you encounter any problem, feel free to let us know. We will be more than happy to reply your message within 24 hours


1) Remove the screw(s) 2) Tap gently with a mallet to crack open the tine cartridge 3) With a flathead screwdriver, pry open until you can see the pin, don't remove the tine cartridge out of the housing 4) push out the pin and remove the tine 5) put a new tine in place 6) put the tine cartridge back in place, tap gently with a mallet


akdavid
2025-08-30 18:22:17
Product is well made. Hardest thing is figuring out orientation, after taking holders apart.
Darla
2025-08-26 10:25:32
I didn't even know that dethatchers wore out, but when my wife said that it was wasn't working at all, I looked and realized the tines were all broken off. These slide right in place of the worn ones and we were like new.
B. W. Goff
2025-08-17 10:25:09
I have run two, separate 50 foot ethernet cables underneath my house through a crawlspace. Also tagged up the cable connecting a satellite disc. They are sharp and sturdy made.
Ed 44
2025-07-27 11:21:34
Product is as described by the vendor. I will be almost impossible to put back together if you take it apart using the dethatcher's owner's manual. Follow the instructions provided by the vendor. That works slick.
sunnyway
2025-07-16 12:13:37
All pins broken after 1/2 work finish. Not good quality
KM
2025-06-23 18:42:44
These fit perfectly and seem fairly heavy duty. I gave the product 3 stars on ease of assembly but that is not really the item as much as it is a little tricky to take the thatcher apart and replace each one. Do a youtube prior to disassembly and you should be OK.
A. Amin
2025-05-19 11:16:40
I noticed our dethatcher was getting a bit clumsy when dethatching. I bought these steel tines and installed them (I was done in 20 minutes).The difference was night and day. I was able to safely say the speed and performance of the dethatcher improved may be by 75%. It was very effecient and took thatch very quickly.Do I recommend it? 100% yes.As you install them, make sure you follow the same way you took the old one so you do not put them backwards.
Amb1119
2025-04-09 10:30:56
Buy a better a better product. After the first time using it - half of these already broke off. Not a very good product.
Cutomer
2025-03-29 12:51:33
ok
Benoit Huot
2025-01-17 17:00:49
Déchaumeuse Yard Works