Your cart is empty.
Your cart is empty.Steel shot filled head adds extra force to hammer blows and eliminates rebound & spark. Unicast design make the hammer solid and durable, and minimizes damage and deadens noise when striking surface torque. The surface of the hammer head is smooth and shiny. Materials solid and durable, acid and alkali resistance, corrosion resistance, high temperature resistance, durable, surface do not fall off. Antiskid handle design, so that the hammer is not easy to fall off, facilitate the holding and soft and comfortable, suitable for long time work. Applicable to Automobiles, construction, wood furniture, lathe, mechanical maintenance, marble installation and other delicate or metal surfaces you want to prevent from marring and sparking.
B. Kibbey
2025-09-03 17:54:06
I purchased the single, 1 lb hammer. For the price point, I have been rather impressed.The weight is good, the shot helps to convey energy, and the material strikes a perfect balance between being soft enough it won't mar even relatively soft surfaces (in my case pine and douglas fir) while being durable enough it doesn't leave marks or break down under fairly heavy work, unlike a typical rubber mallet.I bought this to use with chisels for woodworking, and had meant it to be a stand-in until I could afford a high-quality woodworking mallet designed for the purpose. It has now become my go-to hammer for anything other then driving nails or re-shaping metal (as in the kind of reshaping that requires an anvil).After building a king bed frame and using this hammer for all the mortise and tenon work and coaxing the joints together, I even went ahead and bought a second just to have a backup.I can not speak to long term durability yet, but it has shown no signs of wear after tens of hours of use, and has held up substantially better than any rubber-headed mallet I have ever owned.It is also a much better option other soft-headed mallets I have tried, because there is zero bounce, so all of the force goes into the strike. Additionally, the shot in the head significantly reduces the effort required, and for chisel work I don't really have to use force, even when tapping the back of a chisel that is horizontal to the workpiece. Simply get a little momentum behind it, and the hammer does the rest.At the same time, it is also superior for this kind of thing to narrow-headed hammers because it distributes the force evenly over the face when using it for things such as tapping a tenon into a mortise or fitting a half lap joint together (or coaxing the pieces apart after a dry fit). In addition to avoiding direct damage to even soft woods, this distributed force avoids accidental cracks or breaks.It also does not leave any rubber behind on the surface that is struck.I'm not someone who often reviews a product, but this one deserves it, I think. If you are looking for an inexpensive hammer that will work as a good all-around tool for woodworking on a budget, I cannot recommend this hammer enough. Similarly, while I haven't used it for metalworking yet, I would definitely use this instead of the rubber mallets I might typically turn to if I needed to "coax" a part on my car or anything similar.
jottings
2025-09-01 16:00:00
This small red mallet has a lot of heft for its size. The molding makes it easy to hold and handle for small jobs, while avoiding damage or marring caused by applying force with a heavier mallet, and without molding.
Nick Giesch
2025-08-23 15:29:45
Hard hitting dead blow hammer. Good balance and non marring.
Jessy_jess
2025-07-31 20:18:57
It feels solid. Haven't use it yet, but it's value for money.
Count
2025-07-24 15:50:10
Perfect!!
sam lewis
2025-06-27 17:10:53
No blow like a dead blow.
Kindle Customer
2025-06-03 14:38:55
Works for all types of chores in my wood shop.
John B
2025-05-30 17:06:37
I use these for driving seals in my car or hitting something I don't want damaged with a direct impact from any other type of hammer or mallet.
Ian Major
2025-05-13 12:31:27
Nicely balanced, durable and comfortable to use. Working on hammering away at some Pig Iron.
Mathew
2025-03-13 12:14:25
Bought this to instal laminate floor, works great. Makes nice contact when hammering. Nicely priced too.
AlxM
2025-02-24 16:52:12
It’s a dead blow hammer, good weight and saved a lot of my patio stones
don
2025-02-04 18:45:59
Good item for pricing, no issues.
Rehaan
2025-01-13 16:45:58
It’s pretty good it just feels a bit cheap works good not sure how long it will last doesn’t feel that strongEdit it’s been a few days and after a few uses it started to crack on the face and edge I have not been using it on anything sharp and it’s not actually 1 pound it’s way Less but you get what you pay for me personally I would spend the extra $3 on a better hammer
Recommended Products
$11.95
$ 5 .99 $5.99
$56.74
$ 27 .99 $27.99