Your cart is empty.
Your cart is empty.Product Description
2 in 1 CO & Smoke Alarm
Super Easy Installation Process For the Carbon Monoxide Detector
Step 1
Select a correct location for your alarm, drill two 5 mm holes in the ceiling or wall(use the mounting bracket as a template) and insert two plastic plugs into the holes, then attach the bracket to the ceiling by using the supplied two screws.
Step 2
Insert and connect a fully charged battery to the alarm.Attach the alarm to the mounting bracket by aligning the locking tab on the bracket to the key holes on the alarm and by twisting the alarm in anti-clockwise.
Step 3
After installation, test the unit by pressing the test button for five seconds. Due to the loudness of the alarm, always stand an armโs length away from the unit when test it.
Guardians of the Home - Carbon Monoxide Detector
Ceiling mounting is preferred in ordinary residential construction.
For maximum protection we suggest an alarm be installed on each level of a multilevel home including every bedroom, hallways, finished attics and basements. Put alarm at both ends of bedroom hallway or large room if hallway or room is more than 30ft.(9.1m) long. If you have only one alarm, ensure it is placed in the hallway outside of the main sleeping area, or in the main bedroom. Verify the alarm can be heard in all sleeping areas.Ceiling mounting is preferred in ordinary residential construction.
Loud Alarm Signal Exceeding 85dB in Alarm Mode
The combination smoke and carbon monoxide alarm. It is operated by battery and it is used for detecting both smoke and poisonous gas--carbon monoxide. The product uses high sensitivity photoelectric sensor to detect smoke and high stability electrochemical co sensor to detect carbon monoxide. Once your living places have carbon monoxide or smoke, once one of them reaches its alarm sensitivity, it will give out both sound alarm and LED indication to warn you that you have to take action to avoid it. The detector is widely used in indoor places where it release carbon monoxide or easily catch a fire.
Suitable for multiple locations
- Dual high stability sensors
- Low-battery warning
- Simplicity and elegance
- SMT manufacture technology: high quality and reliability
Test button for battery and alarm operation verification, Test button; tests unitโs electronic circuitry, buzzer and battery function.
Product Details
Simplicity and Elegance
- Package list:
- 1 x carbon monoxide detector.
- 1 x holder. shell (of crab etc)
- 2 x screws.
- 2 x expansion pipes.
- 3 x AA batteries
- 1 x user manual (English๏ผ
- More details can be found in the manual
- Installation can refer to the main picture video
Kindle
2025-06-24 12:44:27
Easy to install. Appear to be working. Hopefully do!
Cathy Delano
2025-05-17 14:04:28
It is Made well. I like that it shows the digital numbers if there is a carbon monoxide leak. Battery operated. The price is very reasonable for four alarms.
Janine Shipman
2025-05-02 18:04:39
They probably work fine but I couldn't keep it in my bedroom. It has a BRIGHT green flashing light letting you know its working (that's good) but if you are sensitive to light, like me, then plan on putting them somewhere else. I tried covering with some tape and it was still too bright! I don't think there is a way to fully do it unless you cover its ability to detect everything properly.
Atrayo
2025-04-27 10:19:46
Hello All,The OLUNCLE Two-In-One Smoke and Carbon Monoxide Detector is a breeze to set up in an effortless plug-and-play straight out of the retail box. It comes with 2 AA generic batteries to install on the rear backing of the unit. Although, there isn't a direct battery cover hatch like with most electronics for some reason or another. The circular ceiling rear mounting plate nonetheless doubles to cover over the exposed set of AA batteries all the same.I chose not to mount to the ceiling my smoke / monoxide detector and kept it on top of my refrigerator in a basket instead. The unit is quite compact and weighs a few ounces with a shrieking TEST button on the front face plate with an electronic LED display. Be sure to be a few feet away or turn the unit away from you when you press the TEST button, it's that extremely loud.The unit comes with a set of aluminum small screws with a set of plastic mounts for the screws. The instructions are only in English with a legible font size overall.
Small Town Girl
2025-02-03 16:33:23
I bought this fire alarm, installed it myself, and guess what? I didnรขโฌโขt need no man to help! Thatรขโฌโขs rightรขโฌโjust me, a screwdriver, and sheer determination. Installation was a breeze, and I only had to double-check the instructions once (okay, maybe twice).The alarm itself is very enthusiastic about keeping me safeรขโฌโso much so that it screams at me every time I slightly over-toast my bread. But hey, better safe than sorry, right? At least I know it works! The battery backup is a nice touch, so I can rest easy knowing itรขโฌโขll yell at me whether the power is on or not.Overall, a solid fire alarm. Just be prepared for it to judge your cooking skills.
Customer
2025-01-22 17:01:11
Three of the four worked the other one was defective.
LesP
2025-01-18 14:32:53
Worked for a while but failed before any battery change. Kept beeping even with new batteries. Had to thrash it.Update on my review. The seller replied to my review and offered to send me a replacement free of charge. He mentioned that the original item may have been able to do a reset although I had already discarded it. The seller then sent me a email that a replacement was on its way.Great customer service support!
Lee Martin
2024-12-28 10:59:48
I have installed my fair share of smoke detectors and this is by far the worst designed mounting bracket ever. There are three plastic j shaped clips that have to slide into three holes on the detector and you turn to lock them in. The problem is that the three clipopenings are not wide enough down to slide into those holes. They end up lining up with the detector. As such you need to somehow from the top push down on the clip a little bit, slide it in, go to the next one, repeat and hope that you're getting all of them in. If you don't get them in they will all come out and you'll have to start again. One of the clips broke on me while I was trying to do this absurd procedure. I would definitely suggest looking for something with much better mount.
Recommended Products