Your cart is empty.
Your cart is empty.Product Description
No-Twist T-Handle Multi-Purpose Lever Clamp
They also are called cantilevered twist clamps.
The clamp’s cantilever design and free-floating jaws eliminate the typical distorting and twisting of workpieces when clamping and allow simple adjustment to uneven surfaces.
Ehoma cantilever C-term design makes it's possible to clamp workpieces like H beam, have 4 Different Gripping Surfaces adjust parallel to the workpiece. Allow non-slip no damage, parallel clamping even on tapered surfaces. Our plates made from high tensile chrome-molybdenum alloy steel.
If you need:
- Get metal fabrication and welding or the sides laser cut and get hold of the right screw and nut combo.
- Use them to clamp your workpiece you need gluing spacer material.
Advantages:
- The cantilever design allows you to clamp with way more force than a C clamp of similar size.
- It won’t twist on you as you tighten it.
- They are very compact which is advantageous for a lot of metal work.
- Lighter, stronger and won't walk-off-center.
4 Different Gripping Surfaces
You’ll can Different Gripping Surfaces thread for best performance.
- Smooth Surface: For general purpose clamping.
- Textured Surface: Increase friction between the clamping surface.
- V Block: Good for clamping round workpiece.
- X Block: Good for clamping round workpiece, angle bar
Ehoma Cantilever Clamps offer several advantages over standard C-Clamps - they're lighter, stronger and won't walk-off-center! Perfect for spot welding, drilling, bolting - or anywhere you need to hold two pieces firmly together.
Bill M.
August 21, 2025
well made clamps
Michael
July 31, 2025
Purchased half a dozen of the Mag-Mate AKA Kant-Twist and 2 of these. All the Mag-Mate clamps were covered in rust, crooked, Jammed, and just poorly made in every way you could that could be screwed up. These Ehoma clamps are the polar opposite. Clean, well made, no slop, and the various faces on the jaws are nice. Only odd thing is nearly all the pictures on the listing are wrong except one. The V side of the jaws are indeed parallel to the clamp. Most of the pictures show them facing sideways.
jonathan guterres
July 28, 2025
Great knockoff of a Kant Twist clamp.
pete
July 6, 2025
They are not a strong as Kant twist clamps and are a little bit bigger so when your machine blades or similar you have to watch with the tools not to hit it versus Kant clampAlso want to crack just after one day of use. See picture
Wayne LaPierre
May 30, 2025
I was once known as Captain Hook, but I lost my hook. I decided to buy this and start a new life as Captain Clamp.
Todd G.
May 15, 2025
Although they are pricey, theses clamps are far superior to the old fashioned c-clamps. They apply a lot more clamping pressure and do it in such a way that the items that are being clamped do not shift. I will be purchasing more of the larger sizes…definitely recommend!!!
Karl Myers
April 22, 2025
These have a regular thread for the clamping instead of a square thread so it does not clamp as hard and it binds up and is extremely difficult to release, another issue is the rivets were loose and caused misalignments
J. Lambert
February 15, 2025
Not much to say, nice quality
Gavin H.
February 4, 2025
Would have given it 5 stars but for the price, a tad too expensive if you need multiple clamps.
Recommended Products
$29.99
$ 15 .99 $15.99