Your cart is empty.
Your cart is empty.Product Description
Sandra S.
2025-08-15 10:19:11
They are not machined as well as other iMatch bushings I've seen (for example, the pin holes are a bit rough). But they fit just fine, don't have any jagged edges I'd worry about, and are very serviceable. These are for a working tractor, not a showpiece.If they cost as much as other bushings, I'd give a lower rating. But for the price these are hard to beat. I'd buy them again.
Kristie
2025-08-09 10:39:54
These are neither 7/8" nor 1 1/8" but somewhere in-between. They are about 1" so there is way too much play/wobble on a true Cat 1 draw pin and obviously will not fit on a true Cat 2 draw pin. Given that there is already a bit of play/wobble with most quick hitches, these are a definite no-go. Even if they did fit a Cat 1 draw pin properly, the roll pins sent with them are really not the right size either and would need to be pounded into the draw pins off of the implement - you would need to remove the draw pins and either press them in with a hydraulic press or pound them in with a hand sledge on a VERY solid surface or anvil.
chester72
2025-08-04 16:28:31
Heavy duty!
dou
2025-08-01 17:17:50
retainer hole too small to receive retainer pins
Customer
2025-07-25 17:42:08
Worked as advertised shipped quickly
M.Regan
2025-07-24 16:40:30
Great items, however the locking pins are hard to set into the holes.
kevin
2025-07-04 13:10:28
Bought a bunch of these to convert all my implements to quick hitch. So far haven’t had any issues with them. Don’t foresee I would
disappointed1
2025-06-24 17:03:34
incorrect description/dimensions
Sandra S.
2025-04-23 15:57:06
They are not machined as well as other iMatch bushings I've seen (for example, the pin holes are a bit rough). But they fit just fine, don't have any jagged edges I'd worry about, and are very serviceable. These are for a working tractor, not a showpiece.If they cost as much as other bushings, I'd give a lower rating. But for the price these are hard to beat. I'd buy them again.
Kristie
2025-04-16 14:44:01
These are neither 7/8" nor 1 1/8" but somewhere in-between. They are about 1" so there is way too much play/wobble on a true Cat 1 draw pin and obviously will not fit on a true Cat 2 draw pin. Given that there is already a bit of play/wobble with most quick hitches, these are a definite no-go. Even if they did fit a Cat 1 draw pin properly, the roll pins sent with them are really not the right size either and would need to be pounded into the draw pins off of the implement - you would need to remove the draw pins and either press them in with a hydraulic press or pound them in with a hand sledge on a VERY solid surface or anvil.
chester72
2025-04-15 18:39:46
Heavy duty!
dou
2025-04-05 10:44:31
retainer hole too small to receive retainer pins
Customer
2025-03-02 10:13:29
Worked as advertised shipped quickly
M.Regan
2025-02-25 11:55:34
Great items, however the locking pins are hard to set into the holes.
kevin
2025-02-15 10:48:28
Bought a bunch of these to convert all my implements to quick hitch. So far haven’t had any issues with them. Don’t foresee I would
disappointed1
2025-01-26 16:58:10
incorrect description/dimensions
Recommended Products
$209.99
$ 85 .99 $85.99