Your cart is empty.
Your cart is empty.Product Description
2" Aluminum Cam lock fittings Part A
2" Aluminum Cam lock fittings Part A
Product Information:
- Item Name: 2" Aluminum Cam lock fitting partA
- The body is made by Gravity Casting., it is stronger
- Part No.: CAM-AL-200-A
- Material: Aluminum Alloy
- Thread type: NPT
Package Include:
- 2 pcs of 2 inch Aluminum Camlock Fitting part A, NPT thread
Decriptions:
Connection:
- The male adapter will connect to female coupler.
- The female thread will connect to male thread..
How It Works:
- To make a connection, simply put the camlock adapter into the female copuler and with normal hand pressure, press the cam levers down.
- Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.
QUAFWIA has more than 10 years of manufacturing experience in this field and has a 20000 square meters factory producing from casting to finished products.
Casting Foundry
Machining Workshop
Casting Warehouse
Lloyd Smith
2025-07-17 13:57:41
Good quality .works great.
walter
2025-05-23 18:34:21
but this is worth the money.
Cindy
2025-05-12 16:51:40
Nicely machined and easily installed.
James L Moore
2025-05-11 18:58:39
I ordered a LOT of these fittings in various configurations. They seem to be reasonable quality on the camlock end but the fitting ends leave a lot to be desired. The female threads were so rough they galled onto the pump discharge flitting and I had to carefully cut then chisel the camlock fitting off then file the threads on my pump fitting true again. There was a lot of damage. I was using the correct thread, but some material peeled off the threads of the camlock and just ended up messing up threads then acting like a lock washer. I suspect buffing the threads on these camlocks with a wire wheel would prevent that problem. The barbed fittings are as cast finish on the barbed side and do NOT slide into hoses easily at all. I am going to run them on a wire wheel on my grinder and see if that helps. The casting quality looks fine and the camlock mating surfaces are finished brilliantly. Can't argue with the price either. I'll buy them again but clean them up before I use them for sure.
Smoker
2025-05-05 10:07:39
Makes hooking up hoses quick and easy.
KSILLY
2025-04-12 17:29:38
Found out that some of my IBC totes come with a coarse thread valve, and some come with a fine thread. These worked perfectly. No leaks and the price was comparable to the plastic cam lock fittings.I found that the valves on many IBC totes are pretty recessed....which means its hard to use cam lock fittings without hitting the IBC tote cage. I was able to make it work with a bit of adjustment. Just a note for anyone wanting to use these with an IBC tote
cathy huffman
2025-02-28 14:27:54
Just right for applicationWhat he wanted
Ritchie
2025-02-09 14:01:42
Good quality
Ryan
2024-12-29 16:07:55
Exactly as expected
Mario Pardo Jimenez
2024-12-23 17:13:17
Très bonne qualité.
Gabriel A.
2024-12-14 15:48:48
Muy buena calidad
Bradley A Bennett
2024-12-02 18:15:49
Looks and performs as advertised
ALYS
2024-11-23 19:37:42
Producto de buena calidad llegó puntualmente. Recomendado
Recommended Products
$19.12
$ 7 .99 $7.99
$13.73
$ 7 .99 $7.99