Your cart is empty.
Your cart is empty.Product Description
PPicasso
2025-09-05 13:53:36
Note they send you TWO units in a package. It works great. My Worksite inflator had a cheap plastic insert in the chuck, and it got boogered within a year, mainly because I was using the presta valve adaptor to inflate bike tires. This one is better because it's all metal. Installation took about two minutes. I was ready to pitch the inflator in the garbage, but this little jewel did the trick.
vburbage
2025-08-26 10:42:40
Connects very easily and disconnects easily. Seals good and would recommend.
das335
2025-08-13 19:44:31
I purchased this when my old Black N Decker AirStation failed due to a worn out chuck.I used a utility knife to cut the old chuck off just past the retention clamp.Next , make sure you slide the included hose clamp down the hose BEFORE you install the new LUMITECO chuck.I inserted the Lumiteco chuck into the freshly cut hose and and twisted the chuck in a clockwise motion to get it fully seated against the end of the hose.Finally, rotate the hose clamp so that the Lumiteco chuck lever can operate freely and tighten the hose clamp until it is secure. I arranged the hose clamp so the retention screw/nut was on the top side (lever is on the bottom) and that worked for me.I needed a replacement tire inflator before I made tgis repair and I purchased the BLACK+DECKER 20V MAX* Inflator directly from Amazon (https://www.amazon.com/gp/product/B074L541Y1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1)It works great and you can use Black N Decker 20V batteries which can be convient .
G.E. from HI
2025-07-26 14:18:53
Works great with my milwaukee portable air compressor. Just screw on tight and the quick disconnect works great. Highly recommend.
L. Comer
2025-07-10 18:19:37
These Brass Locking Tire Air Chucks are a good buy. For those who need to deal with slow leaks, until they can address it at the repair shop, these chucks can hold the tire valve securely. They relieve the user of having to align to the threads of the valve for a proper securement. Just squeeze, push on and release the grip. Then for those who have trouble squatting, bending, stooping; those who have trouble screwing the tube to the valve stem: situation resolved. I sound like a commercial, but the relief is real. I highly recommend this product; especially if you are getting slower unscrewing the valve connect on your current inflator.
Donnie L Barber
2025-07-02 15:55:05
Works great makes inflating tires easier and saves time
Ole Dog
2025-05-08 20:03:39
These are well made (is it possible to be too much so?)! They screw right into the Schreader connection of the existing pump and thus bypassing the leaking during the unscrew disconnect. Squeeze the lever, push on to the valve stem, let the lever go, and you're good to go!
Someguyyeah
2025-04-28 14:38:01
Works well below about 45 psi, they leak a bit when I use them on my pickup trucks higher pressure tires.
Alexandre da Silva Nascimento
2025-03-15 13:03:09
Boa peça para calibrar pneu.
Boddhisatta
2025-01-28 17:44:03
Práctica y sin ser un aditamento que le de más volumen a la manguera y asà al guardar el compresor no haya necesidad de quitarla. Facilita muchÃsimo el inflado y sin perder aire en la llanta.
Recommended Products