Your cart is empty.
Your cart is empty.Product Description
UCFL206-20 1-1/4" Bore 2 Bolt Flange Block Bearing Mounted Unit
Quantity: 2
Cast Iron Housing
5-13/16" overall length
4-39/64" bolt center distance
Uses 1/2" diameter mounting bolts
Thomas C.
2025-08-24 15:18:08
I bought a set of these bearings then changed my design and need another set to match the original set so I bought a second set. These bearings are holding the weight (350lbs) and preforming excellent. Both shipments arrive on time.
james m.
2025-08-19 17:00:00
Good
MrPestyCat
2025-06-11 14:44:19
Bearings like these can run $50 each if you look around. But these are heavy cast metal with a sealed ball bearing. Dimensions are accurate. I have a light load so I don’t bother lubricating through the oil port. Work great and I highly can recommend!
John Cekala
2025-05-21 19:11:49
The two I received had tight tolerances making for an interference fit instead of a slip fit. The grease fittings included will help keeping these bearings lubircated. Used these on a 30 year old go-kart rebuild.
Tom Gallaspie
2025-05-16 18:05:18
I haven’t used these yet, but I have used this brand of bearings in past, and can say that they will hold up better than most other brands. I can’t send a picture cause this app won’t let me view all my photos
DIY New England
2025-05-10 13:10:42
I rebuilt an old, abused Brent pottery wheel (kickwheel) that had rusty, rough bearings. Pottery wheels only need to spin at 60-240 rpm, but smoothness and sound level are important. Before installation of the new bearings, the wheel could spin for about 5 minutes but vibrated a lot and was loud. After installation of these deepdream bearings, the wheel spun 80% longer, was very quiet, and the vibration was 25% (or less) of the previous levels as measured by the Vibrometer app. I am very happy with the performance of the rebuilt pottery wheel. Contrary to what another reviewer said, the bearings I received ARE self-aligning bearings. I did note that one of the four set screws was missing the ball end, but this is not an issue for me.
Customer
2025-04-23 18:32:00
It's a shame because these seem well made otherwise but like others have said, these mic in at .72 and .73. They also use the picture for the UC204-16 but altered the picture to show "UC204-12" - if you watch the video, it's the -16 that has the self centering set screws.
Sandman
2025-02-11 18:29:20
I used these bearings for a dump trailer tarp roller. They are well made, and the self-aligning feature is really helpful and so is the grease fitting so these should last for a long time. I very satisfied so far.
dan
2025-02-03 17:47:46
worked well and having a grease fitting is a big plus
Duncan P.
2025-01-14 17:08:53
These bearings are doing the trick.Originally I had thought that they were irreversibly out of whack.But if you bolt these to a surface and use a long pipe you can centre these, I found a good way to gauge was to bolt them on a level surface then put a level on them and adjust till the face of the bearing is level.
Sam
2025-01-01 14:15:21
I Almost went everywhere every hardware store finally I have bought this item from Amazon like a snap of the finger not only that fast shipping before expected date
Harold Pépin
2024-12-24 10:17:33
Bonne qualité
MECANO
2024-12-11 16:26:43
bonjour les roulements supporte tres bien la charge.merci.
Recommended Products
$22.29
$ 11 .99 $11.99