Your cart is empty.
Your cart is empty. Specifications:
- Frequency division point: 2750/2800 switch adjustable.
- Low pitched second order 12dB, high pitched third order 18dB for phase compensation, clean sound separation.
- The wiring arrangement is scientific, with simulation and physical sound calibration, which can be matched with the vast majority of speakers.
- Low pitched 1.0mm large wire diameter high temperature resistant copper clad aluminum inductor. Polypropylene audio frequency coupling high voltage capacitor for high tone capacitance.
- The solderless terminal block is easy to install, making it a good choice for upgrading the assembly speaker to replace the ordinary frequency divider.
Specifications:
Product Name: HiFi Speaker Crossover
Power: 250W
Impedance: 4 - 12Ω
Crossover Points: 2750/2800 Hz
Product Weight: 144G/0.32Lb
Product Dimensions (L*W*H) : 110*71*28 MM/4.33*2.80*1.10 Inches
Package Includes:
1 x Frequency Divider
BennyZ
2025-08-24 10:38:18
The Trebble is much louder and clearer the, my old crossover and theres no distortion or white noise at much higher volumes unlike my old ones, also the sound is more accurate and sounds amazing on my 50" loudspeakers, However I have to turn my bass all the way up to be balanced. But now it sounds awesome, update i turned bass management on in my computer setting and it fixed my low bass problem still no distortion but they vibrate my floor now ðŸ˜
loquatious of the borg
2025-08-22 15:50:46
Well, it does what it says. I would have preferred a slightly different XOVER frequency. It seems well made and I used it(with an external amp, of course) as an inexpensive alternative to replacing a one-of-kind amplifier in a powered speaker.This is for a garage system so if it plays loudly and annoys my neighbors it's all good.One thing...I am not in love with the wire connection points, but that was not a deal breaker.
Fritz The Cat
2025-07-01 12:01:19
Terminal blocks make for an easy install. Put these in a set of Klipsch KG 4.2. The original crossovers sat flat on the inside of the speaker, these did not due to the solder points. Had to use standoffs. No big deal as I just happened to have some.
David Spisak
2025-06-24 15:28:44
Bought a used Peavey KB5 keyboard amp on eBay and found that the choke coil on the 2-way crossover network was cooked...it was a melted mass. Peavey no longer stocks replacement crossovers for this amp. I found this one and the numbers said it should work. It works beautifully and was a pretty easy fix.
GASMAN
2025-04-17 12:48:50
Works just fine
RegularJoe
2025-04-13 14:14:51
Good Value for low budget. Had to replace a woofer in a Rockville 12" PA speaker, bought this to replace original crossover at same time. Sounds much better
Lamaat
2025-02-28 13:01:46
Excellent crossover, looks fantastic.
LtJ
2025-02-10 11:34:45
Difficile de trouver un point négatif à ces filtres. Ils sont de conception sérieuse, avec des composants suffisamment dimensionnés pour encaisser quelques dizaines de Watts RMS sans broncher.Seuls défauts mineurs : j'imagine qu'ils auraient du mal avec une source qui les soumettrait vraiment aux 250 W RMS annoncés (même en pic), valeur que les constructeurs ont tendance à souvent surévaluer, et les borniers à vis sont assez fragiles. Pensez à bien les maintenir d'une main si vous ne voulez pas les arracher de la carte pendant que vous serrez les câbles...
SYMTRIT
2025-01-20 13:05:41
First off.....if you are unfamiliar with the idea of how a crossover works, and why, do not expect a random crossover to suit your speakers properly. The component values need to match, within reason, your speakers needs and electrical values. This requires a very complex understanding of many things.This particular crossovers values put quite a bit of mid to higher frequency, and volume, into the woofer, which, to my ears (depending on speaker components and values) suits Jazz/classical/etc type music quite well. Lots of clarity in the music. This may give the appearance of "less bass" on some speakers and to some ears and for some music. Again, this is extremely dependent on you speaker types, cabinets, etc etc etc. So far theses have definitely been a great buy for my situation.
Recommended Products
