Your cart is empty.
Your cart is empty.Product Description
Premium Material
Centered hole sliding t-nut is made of carbon steel with nickel plating finishing.
Widely Use
These slide-in T-nuts with centered threaded hole are widely used for aluminum extrusions, a cost-effective fastening option for T-track.
Easy to Install
Sliding nut can only be inserted into T-slot from the end profile, very easy to be slide into T-slot of aluminum profile.
Crawford A. Lindsey, Jr.
2025-09-04 17:57:12
These are the size and shape I needed for the spoil board on my CNC machine.
Frank
2025-07-30 19:22:24
Got these t-nuts for woodworking purposes, including use on hold-downs, sliding track items, and 90-degree attachments.1. They fit 1/4-20 bolts without problems.2. The finish is okay but the threaded areas tend to be a little rough with leftover shavings. I filed them down and resolved the issue. The edges are finished well enough to slide along t-track with no problems.3. The price is reasonable for a pack of 20.While not the best t-nuts I have used, these are worth the purchase.
K. Mosher
2025-07-10 13:44:24
I have been searching for T-nuts that fit my Nextwave Shark CNC so that I could add spoiler boards. Unfortunately, most do not fit this size of t track. These do.
kneebuster
2025-07-04 21:12:29
Not a whole lot to say about these. The quality is good, and they work as well as the name brand version.
Big John
2025-06-05 14:52:09
I've been redoing my workbench top, building out a cross-cut sled and just generally trying to upgrade my amateur woodworking setup. As part of that, I'm utilizing some t-tracks and some dovetail grooves with MicroJig attachments, for clamping, etc. I got these to allow me to experiment with a variety of options in these track channels. By having just the threaded heads, I have bought inexpensive matching threaded rods so I can configure my work areas in a number of different ways depending on my needs.
John T. Horner
2025-05-14 18:03:59
These t-nuts work fine. The sizing and threads are correct. The coating provides some level of corrosion resistance for indoor, dry environments. The edge where the thread protrude are a little crude, but not so much so as to be a finger cut danger for most.Made in China and delivered in a simple plastic bag (which is fine for these).
Yolanda
2025-04-05 12:04:59
I use these in my woodshop for various jigs/fixtures. I don't have a use immediately, but seems like I go through 1/4 - 20 hardware constantly. I did check a few pieces with some of my standard hardware and everything screwed together as expected. Would definitely recommend!
Matty j
2025-01-09 17:36:53
Beware. They claim to be stainless steel but rusted in a cup of water over night. I assume maybe just stainless coated. They did fit well though.
Recommended Products