Your cart is empty.
Your cart is empty.
It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.
【4.0 inch Large Touchscreen】:let you operate and see the data more clearly.
【3000mAh Rechargeable Battery】:can be fully charged within 3 hours,no need to charge frequently.
【32GB TF SD card】:can directly record data to the card ,which is convenient for your data sharing and storage.
【2-In-1 Multifunctional】:When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.
【Signal Generator】:Built-in calibration signal generator that is used for automatic self test and low input calibration.
【PC Control Available】:Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator.
【Tinysa-APP】:APP transfers data directly to the computer.The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
【200Hz-850KHz RBW】:The RBW is as low as 200Hz, which can effectively distinguish adjacent signals andmeet the requirements of SSB dual satellite intermodulation test
【Package List】
1x Tinysa ULTRA Spectrum Analyzer
2 x30cm ALSR100 SMA cables
1 x USB Type-C data cable
1 x SMA-SMA barrel connector
1x TLanyard and touch plectrum
1 x Antenna with SMA connector
1 x32GB MicroSD card(plugged in the host)
【What Can you Do with TinySA】
1 Measuring Harmonics
2 Measuring Spectral Purity
3 Measuring Phase Noise
4 Measuring Third Order Intermodulation
5 Measuring IQ Balance
6 Measuring Spur Free Dynamic Range
7 Measuring Low Frequencies
8 Capturing ISM Transmissions
9 Tuning Sweep Settings
10 Coax Cable lmpact
11 Measuring the harmonic content of an Ultimate 3 transmitter by AE5X
12 Measuring FM Deviation
13 Measuring AM Modulation
14 Adding an LNA
15 Using a Tracking Generatou to measure a Mixer