2025 New Upgrade Comprehensive TPMS Diagnosis Tool & FULL OBD2 Function

LAUNCH X431 Creader 5011 V2 TPMS Tool is an all-around professional tire pressure checking device, which is the upgraded version of LAUNCH CRT5011E/CRT5011X.LAUNCH CREADER 5011 V2 TPMS diagnostic tool can fully diagnose the TPMS problem, activate TPMS sensors, TPMS re -learning, and sensor OE number query.LAUNCH X431 Creader 5011 V2 TPMS Tool is equipped with Android 8.1 system, 5 inches Display, 720*1280 pixels, 6000mAh large -capacity batteries, 2+32GB memory,which is easy to operate and can be connected to WIFI online diagnostics, free software upgrade. LAUNCH X431 Creader 5011 V2 TPMS Tool Help you complete the replacement of tire pressure sensors, tire replacement, vehicle factory online assembly and inspection, and independent detection of the sensor itself is correct.

Full OBDll Function: includes code reading/clearing, I/M readiness, data stream, freeze frame, on-board monitor test, E.VAP system test, retrieve vehicle information and so on.

12 Services Function: includes Brake Reset,Oil Reset,,Inject Reset,Battery Matching,ABS Bleeding,Throttle Reset,D-P-F Reset,Sunroof Reset,Seats Calibration,Windows Calibration,EVAP Monitor Test,etc.

Activate 99% & 315MHz/ 433MHz Sensor: LAUNCH Creader TPMS 5011 V2 can easily activate most of OEM 315/433MHz TPMS sensors on the market,Reading/copy/writing sensor ID value,support Unlimited Repeated Programming and diagnose the tire pressure system.

TPMS Relearn:helps to perform automatic, static or OBDII relearning; The built-in TPMS relearning guide varies with the car's make, model, and year.

Check OE Number: help you query the model menu according to the sensor part number, and the model menu can be located more accurately.

Read & Write Sensor ID: supports automatic creation, manual creation, OBD ID copying, active ID copying, and batch creation for multiple sensors (up to 8 at once).Provides service personnel with greater flexibility and control to diagnose, repair and replace tire pressure sensors more efficiently and accurately.

ACTIVATE 99% Vehicles TPMS SENSORS

ACTIVATE TPMS SENSORS

• LAUNCH Creader TPMS 5011 V2 can activate all 315/433MHz tire pressure sensors. Use LAUNCH Creader TPMS 5011 V2 to touch the tire pressure sensor on the tire. And collected tire pressure information, such as sensor ID, tire pressure, tire frequency, tire temperature and battery condition.
• Visual interface, Allow users to understand easily, quickly understand your tire status.

TPMS Diagnose

• LAUNCH Creader TPMS 5011 V2 can help you to diagnose the TPMS system, read and clear the TPMS dtc, view the detailed description of the dtc, and check the status of all TPMS sensors.

Unlimited Repeat Programming

LAUNCH Creader TPMS 5011 V2 programs sensor data to LAUNCH sensors and replaces sensors that have low batteries or are not functioning properly. It can program up to 8 LAUNCH sensors simultaneously.LAUNCH Creader TPMS 5011 V2 can work with LAUNCH LTR-01/03 Sensor.

>>3 Modes to Program LAUNCH LTR-01/03 SENSOR

1. Manually create can manually enter the original ID.
2. Automatic creation the system automatically generates ID.
3. Copy ID copy the old sensor ID to the LAUNCH LTR-01/03 SENSOR if the old sensor can still be activated.

Activate 99% & 315MHz/ 433MHz Sensors

LAUNCH Creader TPMS 5011 V2 can easily activate most of OEM 315/433MHz TPMS sensors on the market,Reading/copy/writing sensor ID value,Allow you to check and view the detailed TPMS sensor relearning program. The relearning operation is only applicable when the newly programmed sensor ID is different from the original sensor ID stored in the vehicle ECU. Relearn is used to write the newly programmed sensor ID into the vehicle's ECU for sensor recognition. You can check the OE number of the original sensor. TPMS 5011 V2 have three relearn methods:OBD Relearn,Automatic Relearn,Stationary Relearn.

OBD Relearn: Write TPMS sensor id to TPMS module through OBD connector.

Automatic Relearn: Complete by driving.

Stationary Relearn: placed in the "Learn Mode".

12 SERVICES FUNCTIONS, Meet 99% Maintenance Needs, Increase Efficiency and Save Time and Money!!!

LAUNCH X431 Creader TPMS 5011 V2 is equipped with 12 OBDII functions.this TPMS tool performs OBDII-assisted relearn, communicates with the vehicle via the OBDI cable, triggers the wheel-mounted sensors, writes the sensor IDs directly to the vehicle's ECU for sensor recognition, and completes the sensor duplication in a snap.

Oil Reset - After completing the oil change, reset the oil change telltale light in order to restart the vehicle's mileage calculation.

Brake Reset - After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light

Battery Matching - evaluates battery charge status,recalibrates the vehicle's electrical system to recognize a new or replacement battery and optimize its performance.

SAS Reset - Learn to correct the angle and solve the problem of the steering angle of the steering wheel.

ABS Bleeding- When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.

Throttle Reset- ensure smooth throttle response after maintenance or component replacement.

D-P-F Regeneration- Clear PM (Particulate Matter) from the D.P.F filter through continuous combustion oxidation mode to stabilize the filter performance.

TPMS Service- When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle’s ECU, reset tire pressure and turn off the tire pressure MIL.

Injector Coding - Write new injector codes into the car system to get the correct cylinder injection amount.

Sunroof Reset- Resetting the sunroof control unit can improve overall v-ehicle functionality.

Seat Calibration - Sets the initial position and functions of the seats after adjustments or replacements.

Windows Calibration- adjusts the position and function of windows to ensure proper operation and alignment.

If you have any questions, please reach us via ediagtools @ hotmail. com, for assistance.