Your cart is empty.
Your cart is empty.Malibu 4.1L / 5.7L 1980, Steering Coupling Assembly (205) by Lares. Quantity: 1 per Pack.
Bama
2025-09-05 11:36:34
Perfect fit for my 1990 Chevy Cheyenne 2500 4x4
park mccann
2025-08-25 14:01:49
This little part changed my entire driving experience in my 34 year old GMC K1500 Sierra!My steering wheel used to turn either way 2 inches before the tires would turn. After replacing the original rag joint it feels like a new truck!! Who would have thought a cheap little part like this could make such a difference!
Gloria
2025-08-11 21:31:30
Majority of work was removing old steering link and conditioning it. Checking fit was done before grinding the rivets and destroying the old rag joint. Initially wasted time trying to just grind the rivet heads. Grind into the old rag joint stops in order to punch out old rivets. Install the rag joint connection to the power steering unit first and then the steering wheel. The play in the steering wheel was reduced significantly and feels firm again.
Dan
2025-07-25 16:52:18
‘02 Chevy S10 ZR2. 22 years on the factory rag joint and this I’d say fixed about 85% of my steering play. Replaced all other steering components except the gearbox and it drives almost like new!I saw some noted concerns about bending the mating flange when driving out the rivets if you only grind one side. If you place an impact socketthat fits slightly loose over the head of the unground side, and hold the assembly on the edge of a work bench before you drive it out you won’t deform the flange.
BMW-Man
2025-06-20 10:04:36
Was a perfect fir and really tightened up my steering. Was a lot of work getting the old one off since the two pins had to be ground all the way off on both sides. The new one went on pretty easy though.
Shawn
2025-06-12 18:24:05
Fits good just be ready to grind away the original rivets. I used a carbide bur. Everything fit
Lisa Shannon
2025-04-19 16:46:31
Fit perfect great replacement part!!
Robert A Lawrence
2025-01-29 11:42:34
This is a perfect 1 to 1 part. Installation was not too difficult in my k1500. Grinding off the rivets from the old part was the most time consuming. After installing my sterring wheel was solid. Virtually all the play I felt before disappeared. Its a drive saving part easy to replace and at a great price.
Recommended Products
