Your cart is empty.
Your cart is empty.
SPECIFICATIONS
- Material: Carbon Steel
- Type: hollow wall anchors
- Finish: Galvanized
- Package Includes: 20 metal hollow wall anchors
Installation: First drill a hole suitable for the diameter of the anchor, push it in and adjust the screw in the fixing piece, you need to use a puller to flatten the collar against the back side of the wall.If you don't have the puller tool you can hold the collar with a pair of vice grips while you turn the screw and it will seat just fine. prevent rotation.
Aidan Gilliam
2025-07-28 20:50:29
Needs a 7/16†hole drilled for all you wondering the same question I was trying to find before I purchased I got the M6 x 1â€Feels like a very strong anchor for the thin plywood on the camper ceiling used it to hang a pull down projector screen that probably weighs about 10 pounds
DB
2025-07-14 17:42:27
These were perfect for a hollow core door. I wanted to hang a ironing board rack and these were perfect and strong enough for the rack, ironing board, iron and robe!
David W
2025-07-10 15:04:09
Used to mount in the camper trailer for a 32" tv worked great perfect for those super thin walls
Tom-Miller
2025-03-11 17:55:03
The sides on this short anchor are quite stiff. I could not get enough torque using a phillips head screwdriver. Bit a hex head screw and an allen driver gave me the needed torque. I used the phillips screws to hold my shelf to the wall. It worked all right but required a trip to Home Depot.
Jeffery M.
2025-02-25 12:36:55
I used these to mount a spice rack/paper towel holder and a couple towel bars. They worked very good in the 1/8" thick. The setting tool made it very easy to install.
Kim
2024-12-24 18:20:20
Quick easy install w/tool. Solid fix!
gguitteau
2024-12-21 13:55:07
I used these install door anchors on my camper door and wall. They’re made to compress against thinner material without the gap usually provided for drywall or wood. I had to search Amazon thoroughly, but it was worth it.
J. O'Neil
2024-12-01 17:10:50
The description at time of purchase did not mention the tool needed to use these. I was under the impression that simply screwing them down with a power drill would collapse the back and hold onto the thin hollow door surface. I’m sure they’re awesome if you have the tool, but worthless without.
Recommended Products
