Your cart is empty.
Your cart is empty.Product Description
JCWERT
2025-08-20 20:43:25
Works great with no leakage. To those looking to replace a bad older HF 10 ton ram the hose oil fitting is the same to simply screw on. The male ram end is 1.285 inches diameter so HF accessories will work but be loose. The female end of the ram likewise is a smaller inner diameter also with HF pins being about .025 larger so they will not fit without alterations. The threads on the ram are 14 TPI whereas HF is 13 TPI. I hope this helps anyone looking to replace their ram as I couldn't find these specs listed for any replacement rams I found.
Edward J.
2025-05-06 17:21:12
I recently purchased a porta power kit (Central Hydraulics 32746) at an online auction. After picking up the item and going to use it, I discovered the ram was missing. I ordered this ram for the kit and it works just fine. No issues attaching the hydraulic line, all attachments seemed to fit fine.
Junk blew up first time I used it
2025-03-17 17:59:05
The thing blew apart the first time I used it
Tommy G.
2025-02-21 17:02:00
Did a good job. Used it for leveling a home and then for work. It did a great job and saved me a ton of time
Customer
2025-01-06 11:27:52
Initially it didn't extend. I had to release pressure and compress by hand them it worked.
john serin
2025-01-05 12:10:03
Don't work
John P.
2024-12-18 11:10:52
Took it straight to work but the double male adapter wouldn't fit in the bottom because of the paint. I filed and sanded till I was down to bare metal but the male adapter is stuck inside and I can't get it out. The packing was loose and sloppy with the quick disconnect broken through the cardboard however it performed as it should under full strength with no leaks. Good product fair price could have done a little better though. Thank you
Recommended Products
$597.00
$ 99 .00 $99.00