Your cart is empty.
Your cart is empty.Product Description
25-2 Trimmer Head
- Replaces OEM Parts:
- 25-2
- 4002 710 2108
- 4002 710 2191
[Arbor Size]:
- 10mm x 1.0 Left Hand Thread
[Trimmer Head Type]:
- Bump & Feed
- Nylon Line is Fed Automatically by Tap Action
- Easily Loads by Inserting Line Into Eyelets and Twisting The Knob
[Trimmer Line]:
- Can Use .080", .095", or .105" Diameter Line
- Double Line for Trimming and Mowing
- Suitable for Lawn Trimming, Around Trees, Between Shrubs Along Edges, Walls and Fences
[Fits The Following Stihl Models]:
- FS44, FS55, FS55R, FS56 (2008 On), FS56R, FS56RC
- FS70, FS70R, FS74, FS76, FS80 (1996 On), FS80R, FS83
- FS85, FS85R, FS87, FS87R, FS90 (2005 On), FS90R
- FS91, FS91R, FS94, FS94R, FS100, FS100R, FS100RX
- FS110, FS110R, FS111RX, FS120, FS120R, FS130, FS130R, FS131, FS131R
- FS200 (1997 On), FS200R, FS240, FS240R, FS250, FS250R, FS260R, FS460R (2011 On)
- FR85, FR85T, FR106, FR108, FR130T, FR220, FR350, FR410, FR450, FR460, FR480
- KM55, KM55R, KM56, KM56R, KM85, KM85R, KM90, KM90R, KM94
- KM100, KM100R, KM110, KM110R, KM120, KM130, KM130R
- KA85, KA85R, KR85, FS-KM, FSA90R, FSA130R, FSA135, FSA135R
How to Install
Step 01
Step 02
Step 03
Step 04
D. Richard
2025-09-06 13:44:26
I purchased this to replace my damaged head on my Stihl trimmer. Removing the old one and replacing with the new one was beyond easy and probably took a total of 3 minutes. Opening the unit up to refill trimmer was a bit stiff but opened up with a little extra pressure with a screw driver. I suspect over time this will loosen up as did the original equipment. Overall pleased with the replacement product and was pleased with the reasonable price.
Dana Blankenship
2025-09-02 16:24:57
This trimmer head fit my Stihl weedeater perfectly. It is made of thick plastic and appears to be really durable. The bump feed works just as it should. Really easy to take the old head off and install the new one. It probably took 2 or 3 minutes.
Scott Wagoner
2025-08-10 12:31:29
Works pretty good. Comes loaded with string. Good price for two spools.
rfairch
2025-07-22 14:42:09
Ordered this for a Stihl FS55 trimmer. Fits perfectly and seems to be made very well. The bump works great. As mentioned it comes spooled with a small amount of trimmer line. I wasnt expecting it to come with any so that was a bonus.
swe
2025-07-13 14:34:48
I purchased this to replace the bump head on a Stihl trimmer. Very easy to install and appeared to be a good quality. The line feeder part, however, does not work at all. It will not feed out the line and so the line just breaks at the head. I have spent more time stopping and taking the head apart just to get the line to feed out when bumped. I purchased additional bump head line feeders from a different company so I am hopeful that I can use them to replace the line holder/feeder on this one.
Real Consumer
2025-07-08 21:31:47
Works just as good as the OEM at a fraction of the cost. The only slight difference, which doesn’t affect fit, is the bump part sticks out a little further than the OEM, or my OEM original was just that far worn down.Installation is easy, there’s a small hole in the trimmers head (may be hidden and plugged with dirt and grass as in my picture), stick a small screwdriver in that hole, rotate the head by hand until you feel your screw driver catch. Unscrew the plastic head by hand, NOTE: It’s a “reverse threadâ€, meaning you turn it counter clockwise to loosen, clockwise to tighten. Hand tight is all you need, it tightens itself from the direction of its rotation.There’s a bolt head on the opposite side of the hole, its there so you can shoot some grease into the head. If you’re having to replace the part being reviewed its probably already past time to put some trimmer head grease in there.The couple reviews I read of people complaining this replacement “sticks†need to use a little common sense. The OEM ones could stick sometimes as well, the solution is simple. When you take it apart to wrap more string clean the dirt out of it for one thing. You can also take sand paper and smooth out around the bump mechanism and the inside of the hole on the outer cover, common sense, until it works smooth and freely.
John Smith
2025-07-01 10:47:00
Good replacement part for my stihl trimmer attachment. Used the lower part for the rebuild.-bump head, and trimmer line holder.
Kris E Edwards
2025-06-30 10:49:18
Unscrewed the old one , screwed this one on and back to work . Simple as that !
Heather K.
2025-06-23 17:16:32
Trimmer head fits perfectly, operates just like original
Ron Schafer
2025-04-07 10:02:50
Works great
Paul
2025-03-22 17:18:30
It fit and works. Looks like it may be slightly inferior quality to original.
SierraDelta
2025-02-22 09:30:25
Connected fast and easy. Works really well. Very happy with my purchase
Pierre R.
2025-02-11 16:14:11
nice trimmer head for a fraction of the original so far so good we will see how long it will last
Recommended Products
$17.97
$ 8 .99 $8.99