Your cart is empty.
Your cart is empty.The bearing is a self-aligning, pillow-shaped bearing that you can easily adjust or replace.Can be used in machinery, transport system, film processing machinery, textile machinery, printing machinery.The bearing material is synthesized from zinc alloy and bearing steel.
MHO
2025-08-22 14:55:10
Be aware before buying , this is a 20mm not 22mm as stated in the product description .
Maureen
2025-06-09 15:39:20
Both the product description and the seller diagram (as of the date of this review) state & show "22 mm" as the inner diameter. However, when measured with an accurate digital caliper, it is in fact only 20 mm inner diameter. We needed 22 mm, so will return it. Otherwise, the bearings were not linear inside the block housing, although can be fixed by hand tapping them into place, but some quality control is missing here. There is a lot of play in the bearing itself. If you want a 20 mm ID bearing, willing to hand straighten it, and your application can accept some wiggle, it could be usable.
J
2025-02-07 11:08:24
This does NOT have a 22mm diameter as stated in the header for the item. The inner diameter is probably really 20mm as I don't have the proper tool to measure but the pipe I wanted to feed through was 22mm in diameter and it was the same size as the sleeve it was supposed to go through. Caused me to have to change everything to make my project work correctly. Other than the incorrect information, the item seemed to be well built. The bearing turned smoothly without any hangups just the wrong size, which is every important.
richardcory
2025-02-01 15:26:00
These are not 22 mm. They are 20mm.
Mason
2024-12-28 14:28:39
Not the right size ordered 22mm bearings and got 20mm quality seems to be alright tho
Recommended Products
