Your cart is empty.
Your cart is empty.Product Description
ABOUT OUR PRODUCTS
Solid Brass
The metal parts of barb bulkhead fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use. Heavy 90°elbow shaped brass barbs and thickened wall, higher strength and very rugged.
Easy to Use
First you need to drill a hole of appropriate size for installation. Then pass the fitting through the bulkhead, pad the washers, tighten the nut. Finally connect the pipe with appropriate size at the end. No doubt, it is easy to operate.
Widely Used
The bulkhead fittings can be applied in water towers, water inlet and outlet, and self-made water storage barrels. Suitable for temperature Control Circuits,pneumatic Circuits,vacuum And Fluid Systems Test Apparatus,lubricant,coolant Lines, etc.
bobtalbot
2025-08-26 12:20:57
It fit perfectly in the car and working well
Magman
2025-07-16 14:22:22
The finish and machine quality are good. Good seal to 3/8†ID hose. Fast shipping.
Harry
2025-06-29 14:55:41
Very good fittings. Kinda expensive.
Wylie Wiggins
2025-06-27 15:43:12
Worked very well for me with the addition of Welders Contact Adhesive on the threads prior to tightening.https://www.amazon.com/Purpose-Adhesive-Industrial-Strength-Welder/dp/B074M7BW62/ref=sr_1_1?crid=2U7A1ERBCJAVY&keywords=welder+contact+adhesive&qid=1698777026&sprefix=Welder+contact+%2Caps%2C170&sr=8-1
Johnmillersart
2025-06-13 21:56:51
I used this to make a gas can into a outboard tank, love this product
Ron Young
2025-04-01 18:43:29
Worked fine.
Joel M
2025-02-08 12:43:05
I was installing a transmission cooler on my truck. I had replaced the radiator with a Aluminum Manual Radiator that had no Transmission cooler. I had to go trough the front radiator support with the new 3/8" hose. instead of using grommets so the hose won't cut. I decided to use these and they were right for the job, as there was no room for the hose to bend without kinking.
JC
2025-01-13 14:17:28
I like how heavy duty they are. I've been looking for something like this for a little while but not really knowing exactly what it was I needed and I happened to stumble across these. Perfect! I used them to pass through the firewall of my 69 camaro to route to a new heater core
JNegator
2025-01-12 18:25:14
Used to add return line to gas tank. Fairly simple install, works like supposed to.
Robert L.
2025-01-07 19:57:04
Will buy more
Recommended Products