Your cart is empty.
Your cart is empty.
3 Way Crossover for HiFi Car / Home Audio system
Model Number: PUV-W3 (4.5"+)
Applicable Speaker Impedance: 4 to 8 Ω
Support Speaker Power: 200W Max
Compatible with most brands and models of car / home audio, Mediant Speakers size required to be greater than 4.5 inches
Specifications:
Material: ABS circuit board
Color: Blue
Voltage: 12V
Out Power: 200W
Frequency Range: 45Hz-25kHz
Frequency division point: 860Hz,6000Hz
Support Impedance: 4 to 8 Ω
Mount Hole Size: 4mm
Mount Hole Distance: 93 x 58mm
Item Dimensions: 3.9" x 1.2"x 2.6"(100 x 30 x 65 mm)
Item Weight: 7.5oz / 212g
Shiping Weight: 9.2oz/261g
Package Includes:
1x 3-Way HiFi Speaker Crossover
Patrick Chastain
2025-09-02 16:44:47
I have no idea what these are meant to go to, but I put them in a set of KLH 9912s with damaged crossovers. They cost $6 each and they work. They appear fairly well made and the crossover ranges are fairly appropriate. Zero complaints for garage speakers.
Serendipitous
2025-08-08 14:32:29
Had to replace the hardwired inline transistors from 1972 Marantz vantage speakers and this works perfectly!Completely replace low, mid and high frequency. Capacitors and transistors providing a crisp and clear perfect sound!Well built circuit board with flawless soldering beads etc. I highly recommend if you're in the market for replacements. Crossover for bookshelf or four speakers!
Michael H.
2025-07-27 12:40:37
Used these to try to make a cheap pair of Dual floor standing speakers sound better and was not disappointed. The Duals had terrible muffled low quality sound then I installed these and they have highs, mids, and bass that's loud crisp and clear.
Ryan L.
2025-05-31 18:55:03
Product does work well and is easy to install, but the crossovers leave something to be desired especially at the low end
Randy Whitely
2025-05-15 14:49:01
Worked well
starman
2025-05-06 09:35:13
I rebuilt my Fisher 12" 3-way cabinets Replacing the tweeters and mids. I kept the heavy double magnet 12" woofers.Used 6" full range and 3" tweeters. These crossovers replace the originals.WOW man, what a difference. Thumping away (:If you are doing a re-build and/or replacing a couple speakers in Your Vintage 3-way cabinets, try these, for the low cost they are the "Bomb"You will hear instruments in songs that you did not know were even there !I can't believe the sound quality.
Steven knights
2025-02-20 10:40:18
Very nice.Works great and there's no problem with power.
Connor Ballin
2025-01-31 11:22:29
I’m using a car audio amplifier for some Dayton audio speakers and the crossover on the amplifier wasn’t giving enough of a full sound for me, (setting high and low pass to 90hz as recommended). These sound fantastic and make the speakers blend fantastically. I do not recommend using a subwoofer with the bass output on this crossover use the 90hz lpf instead because it does not block out the middle-low midrange on the bass output. Instead I recommend using a larger PA midbass-midrange style woofer such as a 8 inch like mine or even a 10 in a 4way set up like mine. A 6.5 would work but I’m not sure it would have as much of the lower midbass range as you larger woofers. Also it says 4-8 ohm but I have one crossover on a bridged channel to my mids and tweets to a final impedance of 2 ohms ( 4-8ohm svc speakers, +and- all wired together on each drivers), so you’ll be safe as long as you don’t drastically exceed the 200 watt rms rating. I’m going to make another speaker as shown in my picture and use it in a dj set up it gets loud and very crispy clear. I can’t record and play Bluetooth at the same time otherwise I’d record a video but I highly reccomend them for a similar to mine setup. The subwoofer is a 10 inch infinity kappa car subwoofer in a 1.5 cube 32 hz tuned birch 4 inch circle ground firing-ported box that works great in home audio or car audio applications as well.
Sammy
2025-01-24 10:03:58
Used it in my Sound Dynamics 300ti. The original mid sounds very very quiet. Overall improvement in the sound after using these crossovers.
Arquifreelance
2025-01-15 13:23:55
Es bueno para filtrar frecuencias, altas y medias, pero en las frecuencias bajas, le falta un poquito más de profundidad en los woofer.
Waldinei dos santos
2025-01-13 11:18:52
The media could not be loaded.
shawn
2024-12-27 10:11:57
My 1978 Toshiba floor model 3 way speakers were sounding dull with no highs , very little bass and very low volume . Installed these crossovers and WoW what a difference. Can’t remember when they sounded this good 😊 ðŸ‘
Recommended Products
$67.41
$ 25 .99 $25.99